Z31/SENSORS/aac php

Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.

{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}

Z31 (A.A.C.) Auxiliary Air Control Valve (Turbo Only)

The AAC (Auxiliary Air Control) Valve is attached to the right side of the intake manifold. The ECU actuates the AAC valve by an ON/OFF pulse. The longer the ON duty is left on, the larger the amount of air that will flow through the AAC valve.

WARNING - Do this modification at your own risk. We Are not responsable for any issues of your own doing.

Common Problems

• Idle issues or surging
• Valve sticking or not actuating
• Electrical connector or wiring faults

Troubleshooting

To test the AAC valve, follow these steps:

• Refer to the diagram above for proper test points.
• Check for correct voltage and resistance as shown.
• Inspect wiring and connector for corrosion or breaks.
• If the valve does not function, it may need cleaning or replacement.