Z31/Cadpaint php

Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.

{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}

Imitating Cadmium Plating

Many of the under hood components came cadmium plated (that metallic gold color plating). Unfortunately, on my ZX, most of it has worn off due from age and grime. This is my best attempt at duplicating the original plating. You can by kits from The Eastwood Company for ~$40, though, having the exact look wasn't important to me (and I didn't want to spend the $40 on the kit).

Here's what I did

Cadmium-Like Finish DIY Guide

- Clean the surface thoroughly using a wire brush, steel wool, or bead blaster. Mask off anything you don’t want painted.

- Spray with a metallic silver paint. Recommended: Duplicolor High Temp Aluminum or Krylon Metallic Chrome.

- Apply clear coat immediately, before the silver paint dries. Use a light misting technique (spritz).

- Without waiting for drying, spritz Krylon Gold Metallic paint unevenly for a splotchy finish.

- Add another spritzed clear coat to seal in the gold layer.

- Very lightly dust with Duplicolor Bronze Wheel Paint from ~24" distance to mute the shine.

- Spritz on a final clear coat—thin, light, and misty. Avoid heavy application.

- Final result (still wet in photo). A satin clear will dry to a low-gloss finish.

- Additional examples using the same technique:

Sources Used

• Writen by: Redare