Forums/Z31P/z31-repairs-forums electronics/Wiring Harness Question

Imported from Z31Performance.com Forums{{#if:johncodya| — original post by johncodya}}{{#if:2019-03-16 17:05:44|, posted 2019-03-16 17:05:44}}{{#if:3| · 3 post{{#ifeq:3|1||s}}}}{{#if:/Z31performance_archive/forum/z31-repairs-forums/electronics/542750-wiring-harness-question.html|
Local archive: view archived thread on dev.z31library.com}}

johncodya: (2019-03-16 17:05:44)

I noticed today while replacing the TPS on my 86 NA I noticed that the wiring harness is for an Auto transmission. The TPS plug has 3 wires and I have the extra plug for the kickdown switch on an auto TPS. Does anyone have any experience in this and know if I can just remove the third TPS wire?

---

FlawleZ: (2019-03-21 17:31:43)

You don't need to have the extra plug on manual trans cars just the TPS connector.

---

johncodya: (2019-03-22 00:54:00)

Yeah I wasn't super clear the third wire going into the tps itself is there when the manual wiring harness only has 2 wires going to the TPS. I replaced my TPS after getting the ecu code for it but I still idle jumpy and didn't know if the auto transmission wiring harness would cause that too.