Forums/Z31P/z31-performance-upgrade-forums engine-mechanical-aa/finishing exhaust, muffler choice?
Imported from Z31Performance.com Forums{{#if:drb5721| — original post by drb5721}}{{#if:2014-08-19 03:53:00|, posted 2014-08-19 03:53:00}}{{#if:6| · 6 post{{#ifeq:6|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-mechanical-aa/24184-finishing-exhaust-muffler-choice.html|
Local archive: view archived thread on dev.z31library.com}}
drb5721: (2014-08-19 03:53:00)
I am running a full 3 in turbo back, with as few bends as I have to make. It's all set up and done minus a muffler. Wanna see who has ran a full 3 in straight turbo back and what they used. Would like to get rid of some of the rasp but understand cams and other components have part to do with the noise.
Axel kain: (2014-08-19 12:16:01)
I have used Borla, and Magnaflow, both sound nice, are straight through, and hold up nicely.
DeleriousZ: (2014-08-19 14:20:43)
Yeah any quality brand you're going to do well with. It's pretty hard to go wrong on these cars tho, the worst you'll make them sound is like a tractor.
FrozenZ: (2014-08-19 15:30:09)
Yeah any quality brand you're going to do well with. It's pretty hard to go wrong on these cars tho, the worst you'll make them sound is like a tractor.
With my magnaflow I get a chubby every time I drive under an overpass.
Parker: (2014-08-19 15:52:37)
Yeah, I love the sound of Zoey's Magnaflow muffler on 3" SS turbo-back with no cat. They just built a 600m tunnel under the airport here in Calgary and I'll drive an hour out of my way just to hear Zoey rumbling through that tunnel. [archived image: biggrin.png]
reddzx: (2015-02-20 00:31:36)
2.5" dual tip Magnaflow part number for my Shiro please