Forums/Z31P/z31-performance-upgrade-forums engine-management/Bee R rev limiter

Imported from Z31Performance.com Forums{{#if:rsfire541| — original post by rsfire541}}{{#if:2014-04-05 18:10:13|, posted 2014-04-05 18:10:13}}{{#if:2| · 2 post{{#ifeq:2|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/23578-bee-r-rev-limiter.html|
Local archive: view archived thread on dev.z31library.com}}

rsfire541: (2014-04-05 18:10:13)

Hey guys, so i just picked up a bee r so i can have launch control at the races. I've read that at least several people have run it on their Z31s. Have any of you got it successfully working? I read someone hooked up the green and yellow wires to pin 8 and 17, the 1° and 120° CAS. I've tried hooking them up to that and reversing the wires, it won't start either way. I've tried hooking the wires up to pin 3 and 34 as well (ign and ign fuse) doesn't work yet. If i hook green up to either ign the car starts but no rev limit. Any ideas?

And yes i know the dangers of Bee R, I've read about lots of 240s sitting on the limiter all day and melting valves or exploding turbos lol. I won't be using it like that.

---

RobGoSlow: (2014-04-11 15:38:28)

Sorry to not be of any help, but I have one of these units too I just never got around to the actual installation. Definitely following this thread for info though. GL!