Forums/Z31P/z31-performance-upgrade-forums cosmetic-interior-exterior/300ZR headlight lenses
Imported from Z31Performance.com Forums{{#if:reddzx| — original post by reddzx}}{{#if:2013-09-15 19:13:33|, posted 2013-09-15 19:13:33}}{{#if:19| · 19 post{{#ifeq:19|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/cosmetic-interior-exterior/22604-300zr-headlight-lenses.html|
Local archive: view archived thread on dev.z31library.com}}
reddzx: (2013-09-15 19:13:33)
UP Garage near Tacoma used to import JDM front clips all the time and Doug Smith still has a few parts laying around. he asked me if I might be interested in these 300ZR headlight assemblies for my Shiro.
The pattern on the glass looks different.
[archived image: 2013-08-29102405.jpg]
DeleriousZ: (2013-09-15 20:05:00)
Curious if there's a DOT sticker on there anywhere?
Dave-D: (2013-09-15 20:45:52)
I would guess that the lens fluting would be different on account of the opposing traffic and how the beams are supposed to direct the light.....
I would also guess that there would be no DOT label anywhere on the lens.
Being for Japanese market only they would supposedly never make it here to North America.
They would probably be 'approved' by whatever Japanese Government Agency approves stuff over there though......
Cool find.
floridaZ: (2013-09-16 04:43:38)
The real question is, does he have any JDM 84-86 headlight assemblies? Cool find.
Dark-V: (2013-10-04 14:27:02)
There are two headlight "standards" if I recall correctly, ECE and DOT. The noticeable difference is that ECE headlights have a reversed step in the beam. In the USA, DOT (LHD) headlamps have a step that goes from the left and up to right. This lowers the beam on the side of oncoming traffic. ECE (RHD) headlamps the step goes from the right up to left since they drive on the opposite side of the road.
Not sure about inspection standards, but you might fail since they test the headlights.
shromy: (2013-10-04 14:38:33)
One would think you could switch and flip sides possibly. Basically l to r ,then flip 180.
reddzx: (2013-10-04 14:47:20)
He has both complete assemblies
slammedcoupe: (2013-10-04 15:06:04)
how much for a set of 84-86 lights?
pm if possible thanks!
reddzx: (2013-10-04 17:23:37)
He only has this one set left over from a 87 300ZR front clip he has shipped from Japan several years ago.
slammedcoupe: (2013-10-04 18:16:45)
ahh too bads! thanks anyways red!
midian: (2013-10-04 19:25:23)
have 84-86, but reflectors are gone.
slammedcoupe: (2013-10-04 20:34:22)
how much?
Greasedmonkey: (2013-10-05 03:24:45)
I want some 84-86 one piece headlights… SOOOO BAD>
midian: (2013-10-05 06:59:38)
I'll upload pictures first, then you decide. OK?
try to do this today (catch a cold, not sure if be able to get garage).
actually, JDM lenses are same to UK lenses (and AUS).
but, if you want to swap.... ehmmm, buckets are also different.
midian: (2013-10-05 07:00:39)
I know at least one of US z31p members who got em not so long ago (EU spec, LHD)
midian: (2013-10-05 11:40:34)
difference
rh light
lh lense
buckets? JDM, EUDM 84-86
862sik: (2013-10-11 05:39:58)
Where do you live? Im looking for a prototype setup to mock something for the 84-86.
reddzx: (2013-10-11 10:38:10)
I live in Tacoma, Washington
midian: (2013-10-11 11:15:39)
if you're asking me - I can say - a little bit too far (mentioned in profile), Moscow rgn =P
if you need not parts, but need dimensions for setup - write down what dimensions you're interested in, and I'll provide measurements you need, during free time.