Forums/Z31P/z31-basics basic-modifications-basic-questions-aka-the-newbie-forum/Wheel Fittment

Imported from Z31Performance.com Forums{{#if:canook2u| — original post by canook2u}}{{#if:2019-04-06 17:20:08|, posted 2019-04-06 17:20:08}}{{#if:2| · 2 post{{#ifeq:2|1||s}}}}{{#if:/Z31performance_archive/forum/z31-basics/basic-modifications-basic-questions-aka-the-newbie-forum/542905-wheel-fittment.html|
Local archive: view archived thread on dev.z31library.com}}

canook2u: (2019-04-06 17:20:08)

Don't shoot me. . . .I did some searching before posting. . . .

I'm looking at some Cobra knockoff wheels; F: 17x9 & R: 17x10.5

Looking to use a 245(F) / 275(R) stagger. Under the fender & w/ out spacers.

My question: these wheels come in two configurations. shallow dish ( F/R) & shallow (F) / deep (R).

Can somebody tell me which one works w/ out using spacers.

I'm sure it's listed here somewhere but I couldn't find it.

I am very familiar w/ offset, (aka back spacing), so knowing what I need based on width is also helpful.

---

Reds89: (2019-04-07 04:13:29)

I'm not answering your specific question, but this is always helpful to have for reference when talking wheels. https://dev.z31library.com/extras_archive/www.thezenthusiast.com/wheelshow.html