Jump to content

Forums/Z31P/z31-basics basic-modifications-basic-questions-aka-the-newbie-forum/GL/GLL Steering Wheels

From Z31 Library

Imported from Z31Performance.com Forums{{#if:TearingRaven| — original post by TearingRaven}}{{#if:2010-05-28 18:31:49|, posted 2010-05-28 18:31:49}}{{#if:2| · 2 post{{#ifeq:2|1||s}}}}{{#if:/Z31performance_archive/forum/z31-basics/basic-modifications-basic-questions-aka-the-newbie-forum/10701-gl-gll-steering-wheels.html|
Local archive: view archived thread on dev.z31library.com}}

TearingRaven: (2010-05-28 18:31:49)

So I did the swap from GLL to GL steering wheel several months back. I much prefer the cleaner look for the three spoke.

However, the GL wheel I have seems to be centered differently. Everything in my front end is fresh so the car drives straight as an arrow and the GLL wheel is centered perfectly. With the GL wheel, the wheel is cocked just slightly clockwise. No matter what way I install it, its off center either way.

What's the deal here?

aceman: (2010-05-28 18:53:46)

turn the drivers side tie rod out and the passenger side in in 1/4 turn increments til it is straight

if you dont do them in equal proportions you can cause tire wear assuming your car was recently aligned. you can also do a string alignment yourself

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-basics_basic-modifications-basic-questions-aka-the-newbie-forum/GL/GLL_Steering_Wheels&oldid=3939"