Jump to content

Forums/Z31P/z31-performance-upgrade-forums suspension-chassis-and-brakes/Subframe Bushing Dimensions

From Z31 Library
Revision as of 05:13, 15 May 2026 by z31p_NissanXRMA (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:NissanXRMA| — original post by NissanXRMA}}{{#if:2014-06-28 01:30:10|, posted 2014-06-28 01:30:10}}{{#if:12| · 12 post{{#ifeq:12|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/suspension-chassis-and-brakes/23952-subframe-bushing-dimensions.html|
Local archive: view archived thread on dev.z31library.com}}

NissanXRMA: (2014-06-28 01:30:10)

Would anyone be so kind to either list the dimensions of aluminum subframe bushings, or have a solidworks file/drawing? I'm planning on making a set when I have access to a lathe again.

Thank you.

G-E: (2014-06-28 02:50:43)

The total height can be anywhere from 68-71mm, the inner diameter is 21mm, the upper end is chamfered, and the body of the bushing will have to be 75.2mm…

You figure out the rest [archived image: smile.png]

NissanXRMA: (2014-08-06 01:41:54)

If anyone is interested in this as well, Gary had a drawing hosted of a spec'd poly bushing.

[archived image: bushingscompared.jpg]

Filipe: (2014-08-06 02:04:41)

^Good man. Way to share the knowledge.

G-E: (2014-08-06 02:13:29)

Except it's not entirely accurate [archived image: smile.png]

NissanXRMA: (2014-08-06 02:16:31)

Neither were you.

G-E: (2014-08-06 02:57:29)

If you're trying to make SOLID subframe bushings, measuring something squishy won't help will it?

NissanXRMA: (2014-08-06 12:22:10)

I never said it was.

G-E: (2014-08-06 20:59:39)

I don't understand, I gave you actual dimensions that fit, how was I wrong?

NissanXRMA: (2014-08-07 02:45:51)

You couldn't describe it in a better way? Or list all the dimensions (larger outer diameter of the annulus, length of the extruded larger OD, ect.) instead of saying "figure out the rest". There are only 5 dimensions.

Augustus Maximus: (2014-08-07 05:05:46)

No fighting or I'll come over and start bitch slapping

G-E: (2014-08-07 06:15:47)

{{#if:NissanXRMA|NissanXRMA wrote:|Quote:}}

… instead of saying "figure out the rest". There are only 5 dimensions.

I'm sorry I didn't give you irrelevant information, I'll try harder next time [archived image: smile.png]

Bunnies!

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-performance-upgrade-forums_suspension-chassis-and-brakes/Subframe_Bushing_Dimensions&oldid=5527"