Jump to content

Forums/Z31P/z31-performance-upgrade-forums suspension-chassis-and-brakes/spacer help

From Z31 Library
Revision as of 05:13, 15 May 2026 by z31p_Onefast87 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:onefast87| — original post by onefast87}}{{#if:2014-01-28 02:05:08|, posted 2014-01-28 02:05:08}}{{#if:7| · 7 post{{#ifeq:7|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/suspension-chassis-and-brakes/23261-spacer-help.html|
Local archive: view archived thread on dev.z31library.com}}

onefast87: (2014-01-28 02:05:08)

I picked up some varrstoens over the summer, and was wondering what is the best/safest way to do spacers??

i only need +5mm

if i use slip on spacers should i do longer studs??

adamvann3: (2014-01-28 02:08:58)

5mm is that no man's land. Some people use extended stud others don't.

If it were me I would run ichiba 50mm studs and ichiba 5~10mm spacer depending on how much room you really need.

Slip on hubs?

G-E: (2014-01-28 02:42:18)

Or… ask zach for my 60mm cromoly studs heh

onefast87: (2014-01-28 03:19:44)

http://www.frsport.com/Ichiba-NS-502…m_p_12867.html

Would this do the trick??

adamvann3: (2014-01-28 03:25:55)

All depends on what hub he is using. I have always swapped/upgraded to slip on hubs with all my cars. Much easier to work with.

onefast87: (2014-01-28 03:37:51)

I have an 88T

adamvann3: (2014-01-29 16:21:39)

Easy as pie then.

I would snag some longer studs to go with the spacer. Super easy to install on slip on hubs, plus if you ever end up using a 10mm or 15mm sometime you will be good to go.

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-performance-upgrade-forums_suspension-chassis-and-brakes/spacer_help&oldid=5481"