Jump to content

Forums/Z31P/z31-basics basic-modifications-basic-questions-aka-the-newbie-forum/Injector clip retainers.

From Z31 Library
Revision as of 05:04, 15 May 2026 by z31p_JN210 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:JN210| — original post by JN210}}{{#if:2011-05-06 16:40:45|, posted 2011-05-06 16:40:45}}{{#if:8| · 8 post{{#ifeq:8|1||s}}}}{{#if:/Z31performance_archive/forum/z31-basics/basic-modifications-basic-questions-aka-the-newbie-forum/14300-injector-clip-retainers.html|
Local archive: view archived thread on dev.z31library.com}}

JN210: (2011-05-06 16:40:45)

Si im not sure where all 6 of mine went…any ideas for replacement? I really dont want to run with nothing holding my clips on my injectors, I was thinkin safety wire around them nice and snug. nowhere else in town has what im looking for.

Careless: (2011-05-06 16:54:26)

orrrrrrr you could buy them from nissan. they're a separate part number from the plastic clip itself.

michaelp: (2011-05-06 17:19:36)

I'd replace all 6 of the connectors with quick release ones off a GM.

JN210: (2011-05-06 17:22:51)

{{#if:| wrote:|Quote:}}

O rly? Do you know what that number is? I tried getting them from my dealership and they couldnt find them. and what are the quickreleases you speak of?

edicer2: (2011-05-06 17:24:21)

{{#if:| wrote:|Quote:}}

whats the quick release ones off of?

superfast300: (2011-05-06 17:29:28)

I just went to the junk yard yesterday and got 6 injector clips off of 2 non turbo eclipses they are the ones that just click on and you can take them off by pressing the sides in real nice if you can do it. O and they were 2nd gen eclipses they fit right on factory injectors

JN210: (2011-05-06 17:35:20)

id really rather not do alot of hack and solder on my harness…lol

Z_Karma: (2011-05-06 17:57:18)

If they use the same sumitomo/yazaki contacts, you can de-pin the contacts from your

current connector housings with a small jewelers screwdriver and re-pin them into the

other connector housings. No need to splice/solder anything.

edit: I recently spliced all new injector connectors into the harness on one of my shiros.

I found that the wires were brittle to the point of cracking when bent. Splicing in new

wires turned out to be the best solution. Unfortunately, the old retainers got tossed.

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-basics_basic-modifications-basic-questions-aka-the-newbie-forum/Injector_clip_retainers.&oldid=3956"