Editing Forums/Z31P/z31-repairs-forums engine-mechanical/distributor question

{{ForumImport
|op_user=mike86z
|op_date=2008-12-24 19:51:24
|post_count=5
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/engine-mechanical/6338-distributor-question.html
}}

'''mike86z:''' <small>(2008-12-24 19:51:24)</small>

my distriutor was accidentally taken out without making any marks. whats the best way to install distributor correctly

thanks

----
'''13PsiPlease:''' <small>(2008-12-25 04:36:39)</small>

Buy a haynes manuel. It will be invaluable to you and save you alot of time so you could already be work-en on your car instead of waiting for a answer on this forum.

----
'''DeleriousZ:''' <small>(2008-12-25 22:32:44)</small>

do not buy a haynes.

go and download the FSM.

it has a picture of exactly what the rotor position is supposed to be when installed with the engine at TDC.

----
'''michaelp:''' <small>(2008-12-25 22:54:36)</small>

{{Quote|user=|}}

[http://xenonz31.com/reference.html http://xenonz31.com/reference.html]

Advantage to the haynes, though, is you have it right there. If you have a laptop you can have in the shop with you, use the FSM [archived image: wink.png]

----
'''kenhill76:''' <small>(2008-12-26 04:33:34)</small>

FSM is good for knowing what to do and the haynes/chiltons is good for knowing how to do it.

get both