Editing Forums/Z31P/z31-repairs-forums electronics/mice meet wire

{{ForumImport
|op_user=masterewok
|op_date=2014-10-14 19:48:30
|post_count=3
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/electronics/24406-mice-meet-wire.html
}}

'''masterewok:''' <small>(2014-10-14 19:48:30)</small>

i planed to tape off what mice chewed up.

bad idea?

sure its a headache to replace all wiring.

most leads to anti theft cell, which i was going to disconnect.

is it possible to disconnect/cut wires before where mice nibbled?

the rest go to conections where my center console sits next to my e brake.

what is their function?

forgive my ignorance.

i live on the farm now and only have my phone to seach threads.

thanks for your help.

----
'''FlyingT:''' <small>(2014-10-14 20:03:14)</small>

Please fill out your profile and give you car year and type. You would get more responses if you do.

Solder and use heat shrink to re-connect the wires. Then wrap them in black electrical tape.

----
'''visco1:''' <small>(2014-10-17 23:07:55)</small>

I had 3 cars get the mice treatment and then I declared war. What a pita. took months to figure out the issues then fix them and then finally nuke the rodents. For the Z they liked the AC wire to the clutch and then the hood insulation. I also used wire loom for covers. Along with what others suggested for fixes , I also use liquid tape that is brush on and water proof when dry. it seals any tape wrap or spliced connectors that aren't perfect.