Editing Forums/Z31P/z31-repairs-forums electronics/Harness connector

{{ForumImport
|op_user=dgz32
|op_date=2019-09-02 22:04:33
|post_count=5
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/electronics/544309-harness-connector.html
}}

'''dgz32:''' <small>(2019-09-02 22:04:33)</small>

I'm rewiring my car and need some help with a couple of connectors.

Pic shows a small yellow'ish connector is which exits the loom with the oil pressure switch connector on the pass-side. Not turning up much with research. Anyone know?

IMG_7132.JPG

Also, I don't have the wire/connector to the blade connector on the starter. From what I can tell, this the inhibitor switch which should be coming off the inhibit relay forward of the pass-side relay box. Is this correct? Can someone tell me where it exits the engine room harness?

Attached Files

IMG_7132.JPG
(170.8 KB)

----
'''dgz32:''' <small>(2019-09-04 16:40:28)</small>

Re the blade connector at the starter, the connector coming off the engine room harness at 14E appears to be it. But the drawing is clearly not showing a blade connector. Can anyone tell me if there's a sub-harness that goes between it and the starter?

ERH_14E_to_starter.png

----
'''AzureblueZ:''' <small>(2019-09-04 19:39:06)</small>

I asked my super knowledgeable z31 buddy. He said: "I think the wires he is looking for are on the sub harness that goes to the alternator."

----
'''Z_Karma:''' <small>(2019-09-04 19:45:01)</small>

Just verified on my SS 820. It's the connector for the oil temp sensor that is threaded into the passenger side of the oilpan.

----
'''dgz32:''' <small>(2019-09-06 15:24:04)</small>

{{Quote|user=AzureblueZ|I asked my super knowledgeable z31 buddy. He said: "I think the wires he is looking for are on the sub harness that goes to the alternator."}}

I didn't see it on the MT/alternator harness that I haveâwhich came off an '87. Have a spare harness from an '84 which also didn't have it. Wonder if it's a wire that's bundled with that harness but not connected to it directly?

There's an '87 car in a parts yard not too far from me. I may try to head over there and see what's up tomorrow.

{{Quote|user=Z_Karma|Just verified on my SS 820. It's the connector for the oil temp sensor that is threaded into the passenger side of the oilpan.}}

Right! Thank you, sir. I'd like to think I'd have figured that one out…eventually.