Editing Forums/Z31P/z31-repairs-forums cosmetic-interior-exterior-aa/Rear speaker covers

{{ForumImport
|op_user=Kcurtis275
|op_date=2015-06-25 08:13:44
|post_count=3
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/cosmetic-interior-exterior-aa/25147-rear-speaker-covers.html
}}

'''Kcurtis275:''' <small>(2015-06-25 08:13:44)</small>

I haven't been able to find a specific post relating to an issue with my rear speaker covers. Both the wire meshes/fabric and the plastic bases to which they attach are in good shape. The wire mesh slides around the base in a narrow channel. However, they do not stay in position when the plastic bases are snapped on the speaker towers. I thought about possibly using a glue or epoxy but wanted to get some advice from the experts.

1988 300zx NA

----
'''Z_Karma:''' <small>(2015-06-25 16:19:03)</small>

I used some copper wire (wire bread ties would also work) and drilled

a few holes in the plastic channel to stitch the mesh to the plastic near the corners.

I avoided using glue as i may want to replace the fabric sometime in the future.

----
'''Kcurtis275:''' <small>(2015-06-26 06:04:11)</small>

Thanks. Great idea and easy to accomplish. I was reluctant to use glue and hoped (and received) a viable solution.

I appreciate the knowledge and ideas from the Forum members.