Editing Forums/Z31P/z31-performance-upgrade-forums suspension-chassis-and-brakes/spacer help

{{ForumImport
|op_user=onefast87
|op_date=2014-01-28 02:05:08
|post_count=7
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/suspension-chassis-and-brakes/23261-spacer-help.html
}}

'''onefast87:''' <small>(2014-01-28 02:05:08)</small>

I picked up some varrstoens over the summer, and was wondering what is the best/safest way to do spacers??

i only need +5mm

if i use slip on spacers should i do longer studs??

----
'''adamvann3:''' <small>(2014-01-28 02:08:58)</small>

5mm is that no man's land. Some people use extended stud others don't.

If it were me I would run ichiba 50mm studs and ichiba 5~10mm spacer depending on how much room you really need.

Slip on hubs?

----
'''G-E:''' <small>(2014-01-28 02:42:18)</small>

Or… ask zach for my 60mm cromoly studs heh

----
'''onefast87:''' <small>(2014-01-28 03:19:44)</small>

[http://www.frsport.com/Ichiba-NS-50205S-Extended-Hubcentric-Wheel-Spacers-5x114-3-5mm_p_12867.html http://www.frsport.com/Ichiba-NS-502…m_p_12867.html]

Would this do the trick??

----
'''adamvann3:''' <small>(2014-01-28 03:25:55)</small>

All depends on what hub he is using. I have always swapped/upgraded to slip on hubs with all my cars. Much easier to work with.

----
'''onefast87:''' <small>(2014-01-28 03:37:51)</small>

I have an 88T

----
'''adamvann3:''' <small>(2014-01-29 16:21:39)</small>

Easy as pie then.

I would snag some longer studs to go with the spacer. Super easy to install on slip on hubs, plus if you ever end up using a 10mm or 15mm sometime you will be good to go.