Editing Forums/Z31P/z31-performance-upgrade-forums driveline-aa/vg33e clutch

{{ForumImport
|op_user=Quickshift
|op_date=2012-08-02 22:00:36
|post_count=4
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/driveline-aa/18836-vg33e-clutch.html
}}

'''Quickshift:''' <small>(2012-08-02 22:00:36)</small>

I was wondering what I could do about a clutch if I swapped in a vg33e. I figured I could just look up a clutch for the car I was taking it out of, but I can't seem to find one for an infinity qx4, i'm guessing because it only came with an automatic. Are 3.3L flywheels the same as a 3.0? so I can use a 3.0 clutch? or can I use a 3.0L flywheel on the 3.3L rotating assembly?

----
'''NissanXRMA:''' <small>(2012-08-02 22:16:29)</small>

{{Quote|user=|}}

Use Vg30e flywheel and clutch/pressure plate assembly.

----
'''Careless:''' <small>(2012-08-02 22:19:40)</small>

if you're putting the engine in a z31 with a z31 transmission, use the z31 parts.

a VG33 swap is really as simple as it gets. you're basically just adding 10% more displacement. aside from that- use as many z31 parts that you can possibly use- and it will be easier for you.

----
'''Quickshift:''' <small>(2012-08-04 04:58:15)</small>

I picked up the vg33e. it didn't come with any accessories, so i guess that's the next thing I have to sort out.