Editing Forums/Z31P/z31-performance-upgrade-forums cosmetic-interior-exterior/na2t wiring issue

{{ForumImport
|op_user=jm9308
|op_date=2013-10-19 20:11:38
|post_count=2
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/cosmetic-interior-exterior/22790-na2t-wiring-issue.html
}}

'''jm9308:''' <small>(2013-10-19 20:11:38)</small>

Need some help from the community.

Na2t heavy stuff complete. Now when I turn it over it fires and at times barely idles below 500 and or chokes.

When I remove the mafs connector at times its starts and idles below 2k.

With 2 pins jumped at the maf connector it start easily, idles and revs like a charm. See attached pic. I apologize for the small size but it seems this new version of v5 is limited to smaller size pics.

I am at a complete loss.

Tripe checked connections, continuity, sensors, new vacuum lines and relays are good.

I am using 85 n/a harness with 87 ecu and o2 sensor. Installed the turbo idle controls and wired as described on the xenonz31 site.

Thanks Attached files

----
'''jm9308:''' <small>(2013-10-27 09:03:31)</small>

Please delete.