Editing Forums/Z31P/Cx racing intercooler and radiator kit

{{ForumImport
|op_user=Willard
|op_date=2017-05-26 02:03:58
|post_count=4
|archive_url=/Z31performance_archive/forum/z31-basics/frequently-asked-questions-faqs/535848-cx-racing-intercooler-and-radiator-kit.html
}}

'''Willard:''' <small>(2017-05-26 02:03:58)</small>

I'm currently installing the radiator and I can't figure out how to mount it. If anyone has any experience with the cx racing kit it would help a bunch

----
'''NissanEgg:''' <small>(2017-05-26 11:56:41)</small>

Best of luck. They do not offer instructions on how do it nor are they willing to help you out if you try to contact them.

----
'''V8srfun:''' <small>(2017-08-05 21:30:41)</small>

Any updates on how this worked out

----
'''FrozenZ:''' <small>(2017-08-06 19:15:36)</small>

The CX Racing kit looks like a garbage design, the IC is basically in the worst place possible. You just gotta accept that your intercooler install will be custom. Go front-mount and don't overthink the pipe sizes because unless you're going huge, in which case you shouldn't need this advice, you are going from a 2" turbo outlet to a 54 or maybe 60mm throttle body so there's no point trying to ram 3" IC piping in there. You can either holesaw through the wheel well which makes it a no-brainer, or go over the top of the rad if you have gone with an efan (Even with a big 3-row rad you just have to clip a little bit from the center nose bracket thing to make room for 2" pipe over the rad, and people with smaller rads can get 2.5" over there.)