Forums/Z31P/z31-repairs-forums engine-mechanical/MAF hot-start question
Imported from Z31Performance.com Forums{{#if:Az4u2c| — original post by Az4u2c}}{{#if:2009-08-02 23:21:39|, posted 2009-08-02 23:21:39}}{{#if:4| · 4 post{{#ifeq:4|1||s}}}}{{#if:/Z31performance_archive/forum/z31-repairs-forums/engine-mechanical/8048-maf-hot-start-question.html|
Local archive: view archived thread on dev.z31library.com}}
Az4u2c: (2009-08-02 23:21:39)
So my car is sometimes tough to start when it's really hot out and it's been running lately. It starts and stumbles a bit and once i get it to rev up, it's fine. One day it would fire, run for 1 second, bog and die. Refused to be revved.
Today it pulled that shit. In the Fry's parking lot when it's like 110*F out. Bastard. And my phone didn't work (thanks altell). So i got to messing with it. Last time it did this start/die start/die crap it was the MAF. So i swapped it with my parts car's.
So since i was stuck, i unhooked the MAF, started the car. Idled fine (wouldn't rev of course). So i plugged the MAF back in and it started and ran fine.
WTF is up with this? Did it need resetting or something? Why the apparent sensitivity to heat? Is it possible it's just contaminated with oil off my K&N? That filter has been on there for a long time, but i did hit it with a little spritz of oil last month.
New 2 Z: (2009-08-02 23:45:44)
i heard K&N oils can hurt our mafs it can cover the little wires in tons of oil.
Az4u2c: (2009-08-03 00:09:10)
Yeah i knew you weren't supposed to really drench those filters. I suppose tonight I should yank that bastard out and see if it's coated.
New 2 Z: (2009-08-03 00:11:29)
try putting the maf on backwards without a filter and see what it does.