Forums/Z31P/z31-repairs-forums electronics/Fixing a horrible mess
Imported from Z31Performance.com Forums{{#if:Serialsam38| — original post by Serialsam38}}{{#if:2019-02-16 15:33:56|, posted 2019-02-16 15:33:56}}{{#if:4| · 4 post{{#ifeq:4|1||s}}}}{{#if:/Z31performance_archive/forum/z31-repairs-forums/electronics/542450-fixing-a-horrible-mess.html|
Local archive: view archived thread on dev.z31library.com}}
Serialsam38: (2019-02-16 15:33:56)
Hi guys,
Yes I am a newbie so far me and my '86 300zx N/A Have done fine. I picked it up for $600. Just drove it 900 miles. My problem is this it has a digital dash in it does not work. When I took the dash out low and behold a speedo cable was there and it is connected. I think they tried to convert it to digital and never got around to it. My absolute question is what harness do i get to go back to analog?
FrozenZ: (2019-02-16 16:45:12)
when you say "it does not work" do you mean nothing on it works or just the speedo doesn't work?
Serialsam38: (2019-02-16 17:03:13)
Speedo, Fuel Gauge, Tachometer. Only the warning lamps work. I looked up the power supply awhile back and it wasnt there so i bought one thinking O easy fix. Not its missing one side of the harness and I tore the whole dash apart looking for it.
FrozenZ: (2019-02-17 13:34:30)
Okay, yep, sounds like you're on the right track. Afraid I don't have much advice besides that there have been a few threads here over the years about conversion back and forth, just start searching…