Jump to content

Forums/Z31P/z31-repairs-forums electronics/Bad/weird running z31

From Z31 Library
Revision as of 05:16, 15 May 2026 by z31p_Datsun300 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:Datsun300| — original post by Datsun300}}{{#if:2018-07-31 22:25:52|, posted 2018-07-31 22:25:52}}{{#if:5| · 5 post{{#ifeq:5|1||s}}}}{{#if:/Z31performance_archive/forum/z31-repairs-forums/electronics/540447-bad-weird-running-z31.html|
Local archive: view archived thread on dev.z31library.com}}

Datsun300: (2018-07-31 22:25:52)

So I have a 1984 Nissan 300zx ae auto and it’s got a very weird problem going on. last year I replaced the spark plug wires and I did the order wrong and I fixed it but I still had a misfire which I then found out a fuel injector wire broke. Well those wires ended up touching and I’ve had a lot of problems since then like if I floor it the engine like cuts out but if I ease into the load I can go to about 2200rpms, it’s a pain to start in the cold, it won’t idle very good like 6-500 rpms till dies, once warm hard to start because it misfires and back fires. Now weird thing is a while ago the alt overcharged to like 18volts and the car still started like crap but would run good as long as it was overcharged.


dbruce: (2018-08-01 01:08:07)

"about 2200rpms" sound like limp home mode


Datsun300: (2018-08-01 01:18:29)

See I thought so but if you continue to ease in it’ll go to about 2700


Dunkine: (2018-08-02 00:45:42)

Check the codes on the ecu yet?


Datsun300: (2018-08-02 01:00:26)

Maf,ac,ecu. I have replaced maf, who cares about ac and I have a new ecu but the car won’t start with that one