Jump to content

Forums/Z31P/z31-repairs-forums electronics/Sensor attached to original radiator

From Z31 Library
Revision as of 05:16, 15 May 2026 by z31p_Captainkim (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:captainkim| — original post by captainkim}}{{#if:2018-07-19 12:50:09|, posted 2018-07-19 12:50:09}}{{#if:3| · 3 post{{#ifeq:3|1||s}}}}{{#if:/Z31performance_archive/forum/z31-repairs-forums/electronics/540275-sensor-attached-to-original-radiator.html|
Local archive: view archived thread on dev.z31library.com}}

captainkim: (2018-07-19 12:50:09)

I changed radiators from the OEM and there was a slot for some sensor that went directly into the radiator. The new one doesnt have a slot ofr it and its now just hanging loose. Does anyone know what that is and if its needed? Do i need to tap the new rad to install the sensor or can I just leave it hanging?

dbruce: (2018-07-19 17:56:34)

The turbo radiator had the sensor to start the electric turbo radiator fan (at 212 degrees?) . If the OEM fan has been deleted or you have your own fans and fan control you don't need it.

fyi - if you deleted the mechanical fan, you need fans to run if the AC is on …

captainkim: (2018-07-19 19:43:16)

Thanks so much. I left the one fans on so hopefully it will suffice. Thanks again

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-repairs-forums_electronics/Sensor_attached_to_original_radiator&oldid=5897"