Forums/Z31P/z31-performance-upgrade-forums suspension-chassis-and-brakes/The Wheel Thread
Imported from Z31Performance.com Forums{{#if:vagabond| — original post by vagabond}}{{#if:2009-08-11 02:46:01|, posted 2009-08-11 02:46:01}}{{#if:44| · 44 post{{#ifeq:44|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/suspension-chassis-and-brakes/8115-the-wheel-thread.html|
Local archive: view archived thread on dev.z31library.com}}
vagabond: (2009-08-11 02:46:01)
Much love for the Wheel Show ( http://www.thezenthusiast.com/wheelshow.html ) but I know there are a bunch of sexy wheels on this forum, currently not in that link, and scattered throughout the abyss of Z31P. Pics & Descriptions only.
(Only installed wheels homeskillets)
Here's my current wackness.
BBS RS 16 x 8/9 +40mm .5"/1" Spacers
[archived image: ct16.jpg]
[archived image: DSC00718.jpg]
(Where the F did I put my center caps?)
edicer2: (2009-08-11 16:11:28)
Heres mine
18x8 tsw thruxtons with a 225/40/z18 general exclaim tire I dont remember the offset
most of these were before the car was lowered with the tokico springs and struts
I defiantly wish i stagered it like 9.5 or something in the back also so i wouldnt need wheel spacers. night now they sit in there kind of far. It looks fine but they defiantly are anywhere near flush with fender
badboyz31: (2009-08-12 13:47:17)
heres mine currently the only pic I have at the time because my dad took my other computer and reformatted it with out me knowing so I lost just about everything
[archived image: 100_0304copy.jpg]
ShamWow: (2009-08-22 15:29:17)
Car: 1984 AE
Wheels: Rota P45R, 18x9.5 et20
Tire Size: 275/35/18 Falken FK452
Suspension: ST Springs, Tokico Illumina dampers, Kouki Rear suspension. Poly Bushings everywhere.
Fitment: 15mm spacer rear, 25.4mm spacer front. Front fenders rolls, rear fenders pulled, AE flares trimmed. Camber approx -1.5ºFR
Calipers: These will clear anything.
Pictures:
[archived image: mikerear.jpg]
[archived image: DSC00509.jpg]
[archived image: 100_0428.jpg]
[archived image: 100_0436.jpg]
Effective Offset (for those who can't do math)
18x9.5 et -5.4 front.
18x9.5 et 5 rear
Will be changing suspension and fitment soon.
OK85ZX: (2009-08-25 13:10:35)
I heard this was a wheel thread with Mike G in it, thought I would stop by :nanan?re
85 with 87 front fenders and AE flares
Motegi Touge 17x9 +24 all around using 1" adapters.
[archived image: IMG_2708.jpg]
[archived image: IMG_9322.jpg]
both pictures courtesy of Kennedy
Matt89: (2009-08-26 02:02:15)
[archived image: enginerebuild-vg30et012-1.jpg]
[archived image: enginerebuild-vg30et014.jpg]
03 Cobra wheels. 275/40/17's front 315/35/17's back
sreich05: (2009-08-26 02:47:22)
Here are mine
MSR
19x8 +25 front
19x10 +40 rear (could use about 10mm adapter)
Racinjitter: (2009-08-26 07:27:55)
Car: 88 NA
Wheels: MB Wheels, Battle, Matte Bronze 18x9.5 et +15
Tire Size: 275/35/18
Suspension: 3ZR type 1 springs
Fitment: direct bolt on, no rolled fenders.
Calipers: Any BBK will fit as long as they aren't 14"+ rotors.
Pictures:
Ok, I guess I will whore out some more pics of the black car. Yawn. 18x9.5 et +15 275/35 all the way around.
84_z31: (2009-08-29 00:16:05)
[archived image: IMG_8077.jpg]
BBS RS 3-piece 16 x 9
[archived image: 100B5751.jpg]
Cobra R Replica's 17 x 9
Racinjitter: (2009-09-02 05:29:53)
Car: 88 SS
Wheels: MB Wheels, Battle, Matte Bronze front 17x9 et +30 rear 18x9.5 et +15
Tire Size: Front 235/40/17 Rear 275/35/18
Suspension: Stance GR+3Way's
Fitment: Front 28mm of spacer, rear direct bolt on. rolled fenders front and rear.
Calipers: Any BBK will fit as long as they aren't 14"+ rotors.
Pictures:17x9 et +2 235/40 in front and 18x9.5 et +15 275/35 in the rear.
Benedict: (2010-01-13 05:46:06)
white slicktop and gray 85 have same suspension components: 88 control arms, 86 strut tubes, camber -3.6*F -4.4*R
17x9+24 with 7mm slip on spacer and nismo 60mm studs 215-45's front
17x10.5+22? 245-45-17's rear
[archived image: P2100037.jpg]
[archived image: P1170032.jpg]
.....
[archived image: P6060010.jpg]
[archived image: P6030050.jpg]
[archived image: P6030047.jpg]
18x10+10 with 7mm slip on spacer and nismo 60mm studs 225-40 front rolled fenders
18x12+10 245-40 rolled and pulled fenders
[archived image: DSCN0022.jpg]
[archived image: IMGP0411.jpg]
[archived image: IMGP0417.jpg]
stock 88na direct fit
18x10+10 245-35's? front
18x12+10 285-30's? rear
[archived image: IMGP0334.jpg]
[archived image: IMGP0327.jpg]
[archived image: IMGP0337.jpg]
85na stock suspension 88 hubs with 1" adapters G35 base model 17x8 225-50's
[archived image: DSCN0023.jpg]
[archived image: DSCN0019.jpg]
enjoy…
[archived image: 3001m.jpg]
TODD03412: (2010-01-14 23:48:02)
HOLY OLDER THREAD, BATMAN! I might as well add to it. 18X9.5 Ruff Racing 278s 20MM offset. NO SPACERS w/ 245/40/18s all the way around.....
adamvann3: (2010-01-15 04:16:03)
Car: 86NA 2+2
Wheels: Cobra R 17x9 +24
Tires: 245/45
Suspension: Stock
Fitment: 10mm spacers in front
Calipers: Stock single piston, not sure about bbk clearance
[archived image: IMG_1113.JPG]
[archived image: IMG_1114.JPG]
[archived image: IMG_1173np.JPG]
Fronts:
[archived image: IMG_1112.JPG]
Look down front
[archived image: IMG_1111.JPG]
Neil86t: (2010-02-02 05:42:15)
Hey Quiz my wheel info is wrong/old (my fault not yours).
Ruff Racing 279
F: 18x8.5 E35 with 35mm adapter, Nankang rubber (same tire size)
R: 18x9.5 E20 with 15mm spacer, BFG G-force sports (same tire size)
Kouki Suspension.
Here is an updated pic:
85z31t88: (2010-02-02 06:04:48)
Might as well throw up my z33 17's just to have it in this thread.
Car: 1985 turbo
Wheels: Z33 (350z) Front: 17x7.5et30
Rear: 17x8et33
Tire Size: Front: 235/45r17 yokohama yk520
Rear: 245/45r17 yokohama yk520
Suspension: coilovers
Fitment: 5/8" spacers all around, rolled inner fender lip all the way around, but clear without doing so.
Calipers: Plenty of brake clearance.
Pictures:
[archived image: Photo0008.jpg]
[archived image: Photo0010.jpg]
bleakdragonmage: (2010-02-02 07:32:01)
Car: 1988
Wheels: Mustang Cobra Deep Dish Replica. 18x10, 22 offset w/ 25mm spacer all the way around. Total offset is -3et.
Tire Size: 235/40/18 front. 265/35/18 rear
Suspension: Eibach springs with i believe 1 coil cut all the way around.
Fitment: 25mm spacers all the way around. Had to roll the rear, needs a slight pull probably. Front is fine, but i have yet to drive it hard. will more than likely need to be rolled at least.
Calipers: 13" 350z brembo rotors, Z32 calipers
Pictures: (Dont mind the quality/ dirty car. When i finish, ill get better pics, promise [archived image: smile.png] )
[archived image: IMG_0001.jpg]
reddzx: (2010-02-02 14:51:33)
Car: 1987 Turbo
Wheels: 05 350Z
Front Size: 17x7.5, Offset: +30mm, Tire: Bridgestone Potenza 225/50/17
Rear Size: 17x8.0, Offset: +33mm, Tire: Bridgestone Potenza 235/50/17
Adapters: Performance Wheel and Tire 1" Hubcentric
Suspension: Eibach Pro Kit .75" lowering springs, KYB shocks, MSA/Z31parts poly bushings.
[archived image: 87turboGL-2.jpg]
[archived image: 1987300ZXTurbo045.jpg]
zzzlow: (2010-02-04 15:57:17)
stock 88na direct fit
18x10+10 245-35's? front
18x12+10 285-30's? rear
[archived image: IMGP0334.jpg]
[archived image: IMGP0327.jpg]
[archived image: IMGP0337.jpg]
Are those Work Equips?
and secon pic…tire is on backwards
PulseCode: (2010-02-11 01:07:20)
1999 Cobra SVT wheels. BFGoodrich tires.
2slick85z31: (2010-02-17 23:41:42)
Car: 85' Na GL
Suspension, tokico blues & stock springs (little saggy)
Wheels: 1986 riken 2 piece welded
Size & offset: 15x7.5 0 offset front and rear
Tires: 215 60 15 Falken Ziex ZE 329's
shitty pic:
[archived image: 0005.jpg]
pic from when i bought her:
[archived image: 15758_1220798676.jpg]
EDIT: moar random pics i found
[archived image: 0008.jpg]
[archived image: 0018.jpg]
[archived image: Photo0164.jpg]
will try to get some better pic's tonight when i go work on her.
edit, pics from tonight
[archived image: Photo0031.jpg]
[archived image: Photo0033.jpg]
[archived image: Photo0034.jpg]
NissanEgg: (2010-02-19 00:43:00)
Rota P45-F 18x8.5" et20 for front, Bridgestone Potenza 245/40R18.
Rota P45-R 18x9.5" et32 for rear, Bridgestone Potenza 275/40R18.
[archived image: DSC01447.jpg]
[archived image: DSC01444.jpg]
[archived image: DSC01448.jpg]
[archived image: DSC01443.jpg]
[archived image: DSC01445.jpg]
[archived image: DSC01446.jpg]
[archived image: DSC01442.jpg]
"Nismo" sticker to fool the newbs.
Had these wheels back in 2006 when I was in Orlando.
Kojack: (2010-03-05 22:54:19)
17x9 +15 Grenades all-round. Maxxis MA-V1 215/40R17
[archived image: IMG_0090.jpg]
[archived image: IMG_0089.jpg]
[archived image: IMG_0088.jpg]
[archived image: IMG_0084.jpg]
[archived image: snc00258.jpg]
[archived image: IMG_0085.jpg]
amreboot: (2010-03-08 07:27:50)
1989 N/A to Turbo
-Wheels-
1" Spacers
Motegi Touge
Fronts - 17x9 +24 on Sumitomo HTR Z II 235/40/17
Rears - 18x10 +30 on Sumitomo HTR Z II 275/40/18
-Springs-
Tokico 1 inch lowering springs
-Shocks-
KYB Rear
Monroe Front
(soon to be illuminas 5-way)
-Calipers-
95TT Z32 font iron quad piston calipers
Stock single piston rear calipers
-Rotors-
R1 Concepts Cross Drilled Z32 front 280mm
R1 Concepts Cross Drilled stock vented rear
PulseCode: (2010-07-09 18:43:11)
One inch spacers added on rear; 10mm up front.
zzzlow: (2010-07-10 16:33:35)
wow, backfrom the dead…ok
19x8, 19x8.5 Rays forged G35 coupe wheels
245/35/19 255/35/19
1" spacer rear, ARP studs, 10mm spacer front (needs 10 more mm), ext studs
[archived image: zzzzzzzzzs011.jpg]
[archived image: bobs024.jpg]
Sharpen047: (2010-07-25 16:32:05)
1986 300zx NA wheels
15 inch with 10mm offset
Tokico/eibach suspension with plenty of clearance.
reddzx: (2010-07-25 18:05:02)
Konig Villans 17x8 +30, KUMHO ECSTA tires 17/225/50 front, 17/135/235/50 rear, 1" hubcentric adapters not installed yet.
[archived image: Timwithcar001.jpg]
[archived image: Konig17X8wheels010.jpg]
85z31t88: (2010-08-08 05:51:32)
never updated this with my new wheels
BBS RZ wheels from a bmw
16x8et23
1.25" spacer/lug pattern adapter
effective offset is ~-8.75
tires are 215/55r16 falken zeix 512
car is lowered with coilovers
[archived image: Photo0283.jpg]
[archived image: Photo0284.jpg]
spike: (2010-08-23 19:44:53)
17x9 et+17 - no spacers - 245/40/17 all around
Needs coilovers bad.
-Strike-: (2010-08-23 20:04:49)
Hey why not, haven't seen these ones on here yet.
2008 350Z Touring V2 Wheels on Bridgestone Potenza RE050A
Front:
Size: 18x8.0
Offset: +30mm
Tire: 225/45/18
Rear:
Size: 18x8.5
Offset: +33mm
Tire: 245/45/18
They are a direct fit, spacers would be nice, but not needed. Lowering would be nice to close up the front gap. But they don't look too bad for now.
[archived image: ShiroWheels.jpg]
DuckeSawz: (2010-08-25 04:12:32)
[archived image: SNC00346.jpg]
Kennedy: (2010-08-25 07:02:07)
DuckeSawz: edit wheel and tyre specs to that post
bronzemfp: (2010-08-31 14:00:46)
current setup =
Sportmax (xxr) 002's
Front 16x8 +0
Rear 16x8 +0
225/50/16 Bridgestone RE-01R Tires. They're Flipping awesome!!! Buy the new RE-11's that replaced the RE-01R's. You will NOT be dissapointed… well maybe with the price, but its worth it.
[archived image: IMG_0915.jpg]
[archived image: IMG_0881.jpg]
new setup
Rota P45R:
Front 17x9 +25
Rear 18x9.5 +20
10mm spacer font
5mm spacer rear for +15 offset all around. ***This spacer combination is not good. I have literally 1mm of clearance between the tire and the coilover. I've ordered 25mm front and 20mm rear spacers for an overall offset of 0. Should give a lot better clearance and make the wheels sit flush.***
Repainted with the duplicolor bronze. It's a nice dark, rich bronze color. should look good on the red car.
Dunlop Direzza dz101 tires.
245/40/17 front
265/35/18 rear
Here's the battleship with 10mm and 5mm spacers: (click on thumbnails for bigger pics)
[archived image: th_IMG_1450.jpg]
[archived image: th_IMG_1452.jpg]
[archived image: th_IMG_1453.jpg]
[archived image: th_IMG_1463.jpg]
now with 25mm and 20mm spacers:
[archived image: th_IMG_1465.jpg]
[archived image: th_IMAG0374.jpg]
[archived image: th_IMAG0377.jpg]
Benedict: (2010-10-05 16:10:07)
guess I should add these
[archived image: DSCN0226.jpg]
[archived image: 40100_669431961210_38906150_36349992_2786461_n-1.jpg]
work vs-kf
18x10 +12 spaced to 0 215/35/18
18x12 +0 255/35/18
88 control arms
adamvann3: (2010-10-06 01:38:03)
Car: 1988ss
Wheels: Gram Lights 57d: Fr 17x9 et.12 (effective +2 with spacer) Rr 18x9.5 et.12 (effective -3 with spacer)
Tire Size: 235/40/17 Nitto NT05 245/40/18 Falken Azenis rt-615
Suspension: Stance setup; Poly everything; Camber Fr.-1.6*, Rr -2.5*
Brakes: z32 calipers with 350z track rotors
Pictures:
[archived image: 5001901650_0d894fa37a_b.jpg]
RedDemon: (2010-12-26 02:24:26)
Car: 1988ss
Wheels: Rota Grid: 18x9.5 et.38 w/38mm spacers (effective 0 with spacer) All around
Tire Size: Front 235/45/18 Rear 245/40/18 Dimondback TR968
Suspension: KTS Coilovers
Brakes: Stock z31 calipers
Pictures:
reddzx: (2011-11-17 04:01:31)
Riken Mesh 16x7, Bridgestone Potenza tires 245/50/16, 1" hubcentric adapters
[archived image: 1989TurboGLL005.jpg]
[archived image: 1989TurboGLL013.jpg]
[archived image: 1989turbo014-1.jpg]
Dave88SS: (2012-06-16 15:42:57)
XXR 527 17x9.75 +25
Tires: Nitto NT02 235/40
[archived image: Z_xxr.jpg]
Volk CV-Pro 17x8 +38 (shown w/20mm spacer), 17x9 +32
Tires: Kumho 245/45
[archived image: DSC_0360.JPG]
[archived image: DSC_0361.JPG]
Z ya later: (2012-06-17 02:26:21)
[quote=Dave88SS]XXR 527 17x9.75 +25
Tires: Nitto NT02 235/40
[archived image: Z_xxr.jpg]
Got any more pics of this combo, im digging it.
-Nick
-Strike-: (2012-06-18 12:12:49)
Figured I'd update my addition, as I am running new, wider tires, and spacers now;
2008 350Z Touring V2 Wheels on Bridgestone Potenza RE760 Sports
Now running Ichiba (WS-25511466C) V2 25mm Hubcentric spacers front and back.
Front:
Size: 18x8.0
Offset: +30mm
Spacer: 25mm
Tire: 235/40/18
Rear:
Size: 18x8.5
Offset: +33mm
Spacer: 25mm
Tire: 255/40/18
[archived image: 12.jpg]
[archived image: 10.jpg]
[archived image: Spacers4.jpg]
[archived image: Spacers.jpg]
badboyz31: (2012-10-31 00:48:59)
Wheel Specs: XXR 521 18x10 +12 all around
Tires: Falken Ziex ze912 235/40's all around
Suspension setup: Rear is s13, with stance coils and SPL control arms, modded z32 control arms, and poly everywhere
Front setup is just stance coils with the camber plates at the top
still need to put the 10mm spacer on the rear, roll and possibly pull in the rear. Front just needs more low
jesus94p: (2012-10-31 01:33:50)
Wheels: XXR 526 17x10 +20 with 38mm spacers all around
Tires: Sunny 235/40's all around
Suspension:
Front- Shortened Strut towers, Scirocco Inserts, Godspeed 7k springs, adjustable perches, and Godspeed Camberplates.
Rear - Godspeed s13 Coilovers
[archived image: 100_3492.jpg]
[archived image: 100_3491.jpg]
DeleriousZ: (2012-10-31 06:26:09)
Varrstoen 2.2.2's? (ES2's)
18x9.5 et12, 25mm spacer, -13 effective
18x10.5 et0.
225/40
245/40 (federals f&r, so they run WIDE)
No camber correction in the rear, Maxed negative camber on camber plates in the front.
Older pics before front was dropped
3Bar: (2016-03-25 03:19:51)
Resurrect an old thread, but here's mine:
XXR 002, 16x8 0 offset with 225/50/16 Kumho Ecsta XS's
Stance coilovers and camber plates.