Jump to content

Forums/Z31P/z31-performance-upgrade-forums engine-mechanical-aa/intercooler piping, pathy intake, hx35

From Z31 Library
Revision as of 05:11, 15 May 2026 by z31p_Drb5721 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:drb5721| — original post by drb5721}}{{#if:2014-05-04 21:53:17|, posted 2014-05-04 21:53:17}}{{#if:2| · 2 post{{#ifeq:2|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-mechanical-aa/23718-intercooler-piping-pathy-intake-hx35.html|
Local archive: view archived thread on dev.z31library.com}}

drb5721: (2014-05-04 21:53:17)

Alright guys. Need some insight. I'm running an hx35 relocated. Also plan to use the pathy plenum. Intercooler is one side outlet backdoor inlet. Inlet is coming straight off of compressor housing to backdoor inlet. Plan to run outlet to throttle body by looping it back through the wheel well through a hole. Issue I have is. Throttle body clears turning housing but I need a way to get a good bend to cut back across the front of the engine. Any ideas?

drb5721: (2014-05-04 23:33:06)

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-performance-upgrade-forums_engine-mechanical-aa/intercooler_piping,_pathy_intake,_hx35&oldid=5173"