Jump to content

Forums/Z31P/z31-performance-upgrade-forums engine-management/Output from dizzy to signal Speed Pro stand alone ECU

From Z31 Library
Revision as of 05:11, 15 May 2026 by z31p_Ralph50 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:ralph50| — original post by ralph50}}{{#if:2017-01-13 12:15:54|, posted 2017-01-13 12:15:54}}{{#if:3| · 3 post{{#ifeq:3|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/534031-output-from-dizzy-to-signal-speed-pro-stand-alone-ecu.html|
Local archive: view archived thread on dev.z31library.com}}

ralph50: (2017-01-13 12:15:54)

From my understanding the dizzy has four wires.

1 . wire positive (Red)

2. negative (BLK)

3. 360 degree optical output (Green)

4. optical output with 6 slots. One being bigger. (white)

I'm trying to figure out if I can use the optical outputs to communicate TDC to the ECU.

And if they do send out a TDC signal what kind of signal is it?

For example the voltage, wavelength etc of the signal.

Thanks

shromy: (2017-01-13 14:35:15)

it can be used and has been with standalones that support it. as far as the voltage etcx, you would have to do the testing yourself. the larger slot in the 6 trigger is tdc. you may find the info you need through megasquirt forums or documents

ralph50: (2017-01-13 16:01:10)

Thanks. I guess I have to figure out how to test. Time to get technical.

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-performance-upgrade-forums_engine-management/Output_from_dizzy_to_signal_Speed_Pro_stand_alone_ECU&oldid=5055"