Forums/Z31P/z31-performance-upgrade-forums engine-management/ECU swap
Imported from Z31Performance.com Forums{{#if:Eric87zx| — original post by Eric87zx}}{{#if:2015-12-26 08:11:13|, posted 2015-12-26 08:11:13}}{{#if:4| · 4 post{{#ifeq:4|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/25508-ecu-swap.html|
Local archive: view archived thread on dev.z31library.com}}
Eric87zx: (2015-12-26 08:11:13)
I have a 1987 300zx turbo with low impedance injectors. I recently got a 1988 turbo ecu with high impedance injector reading. I know you're suppose to wire in some resistors to fix the high and low problem. Other then that will I need to do any other wiring to make this ecu work?
bonfire79: (2015-12-26 08:52:38)
might be easier to just swap out your low I injectors for some high I injectors from an 88 turbo car
Bon
Eric87zx: (2015-12-26 09:04:55)
I plan on going with a Jim wolf ecu and their injectors they recommend to use with the tune which I think are high.
amreboot: (2015-12-26 16:43:32)