Jump to content

Forums/Z31P/z31-performance-upgrade-forums engine-management/Microtech on Matrix mode: Need hand-holding.

From Z31 Library
Revision as of 05:10, 15 May 2026 by z31p_Butter (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:Butter| — original post by Butter}}{{#if:2015-04-15 21:46:20|, posted 2015-04-15 21:46:20}}{{#if:3| · 3 post{{#ifeq:3|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/24945-microtech-on-matrix-mode-need-hand-holding.html|
Local archive: view archived thread on dev.z31library.com}}

Butter: (2015-04-15 21:46:20)

Fix this.

I think the brown and the blue upper rpm area was road tuned years ago by me, but I can't remember. Tell me something to get me close, so I don't waste a ton of time that I don't have.

88sinZ: (2015-04-16 00:55:43)

Take hose cutter..

HoseCutter.jpg

Cut wiring harness.

Install TEC3.

Butter: (2015-04-16 05:02:13)

The Z is running a TECgt, so I already know how much better it is (in a lot of ways, not really).

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-performance-upgrade-forums_engine-management/Microtech_on_Matrix_mode:_Need_hand-holding.&oldid=5007"