Jump to content

Forums/Z31P/z31-performance-upgrade-forums cosmetic-interior-exterior/Paint for suspension parts

From Z31 Library
Revision as of 05:07, 15 May 2026 by z31p_Wbnethery3 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:wbnethery3| — original post by wbnethery3}}{{#if:2014-06-27 19:25:44|, posted 2014-06-27 19:25:44}}{{#if:9| · 9 post{{#ifeq:9|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/cosmetic-interior-exterior/23949-paint-for-suspension-parts.html|
Local archive: view archived thread on dev.z31library.com}}

wbnethery3: (2014-06-27 19:25:44)

I'm doing a few things and took my strut tubes and springs off. Just wondered what paint folks use when they're refreshing everything. I see a lot of gloss black (and some other colors) but wondered if it's just rattle can from the hardware store or something more tailored to the application. I know for high-heat items you need to get the appropriate stuff, but this is mainly for appearance on things that should not get hot.


Axel kain: (2014-06-27 19:34:42)

flat black, and the "quick dry" under body coating.


slammedcoupe: (2014-06-27 19:41:09)

I use high heat spray can, baked in the oven for extra strength.


G-E: (2014-06-27 20:44:18)

Brush on rustoleum/tremclad oil based rust paint, then bake


Z_Karma: (2014-06-27 20:44:41)

I clean it pretty well and use Rustoleum hammered finish topcoat in either black or gray/silver.


reddzx: (2014-06-27 20:46:48)

I degrease that shit and leave it alone, spend rattle can money on actual parts


mcx: (2014-06-27 23:14:54)

VHT satin black epoxy.


Filipe: (2014-06-28 18:27:52)

Rustoleum Black, a couple coats and they're good to go.


862sik: (2014-06-28 19:45:15)

I use duplicolor ceramic high heat. Very durable and dries quick. Usually I degrease with purple power then pressure wash my suspension stuff first.