Jump to content

Forums/Z31P/z31-performance-upgrade-forums cosmetic-interior-exterior/digital dash harness protector help required

From Z31 Library
Revision as of 05:07, 15 May 2026 by z31p_Ty86300zxt (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:ty86300zxt| — original post by ty86300zxt}}{{#if:2014-06-19 17:50:24|, posted 2014-06-19 17:50:24}}{{#if:2| · 2 post{{#ifeq:2|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/cosmetic-interior-exterior/23906-digital-dash-harness-protector-help-required.html|
Local archive: view archived thread on dev.z31library.com}}

ty86300zxt: (2014-06-19 17:50:24)

I was hoping someone might be able to help me determine the correct type of screw to use with the digital dash harness protector harness. This is the yellow piece of plastic that the 3 digital dash wiring harness connectors sit in.

This is suppose to screw to underneath the dash to prevent it from rattling around.

I've checked the fiche but it doesn't seem to show which screw was used. It does list the metal bracket and the screw to screw the bracket to the dash but not to screw the harness protector into the bracket

Here is a pic of where I am missing the screws. I was hoping someone might be able to help by taking a picture of their digital dash harness in that same location. Atleast to help give me an idea of type of screw to use.

Thanks

Tyler

IMG_20140616_215003.jpg


ty86300zxt: (2014-06-19 17:57:21)

Unfortunately not.

This is the car I converted from GL to GLL so GL didn't have the screws to begin with and the fiche doesn't seem to mention them. I've found in the fiche the plastic protector harness as well as the metal bracket and the screw and grommit for the metal bracket but not the screws for the protector harness to screw into the metal bracket

Any pics or help would be greatly appreciated