Jump to content

Forums/Z31P/z31-basics basic-modifications-basic-questions-aka-the-newbie-forum/Maxima Oil Filter Location

From Z31 Library
Revision as of 05:06, 15 May 2026 by z31p_Sprtcrazy17 (talk | contribs) (Forum archive import (z31performance))
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Imported from Z31Performance.com Forums{{#if:sprtcrazy17| — original post by sprtcrazy17}}{{#if:2010-02-22 22:56:17|, posted 2010-02-22 22:56:17}}{{#if:4| · 4 post{{#ifeq:4|1||s}}}}{{#if:/Z31performance_archive/forum/z31-basics/basic-modifications-basic-questions-aka-the-newbie-forum/9644-maxima-oil-filter-location.html|
Local archive: view archived thread on dev.z31library.com}}

sprtcrazy17: (2010-02-22 22:56:17)

From what I've read I understood VG30 blocks are all the same essentially. This is from a 91 I believe, maxima. The oil filter is in the way of the exhaust manifold. And it has this goofy design to it that puts in directly in its path. Anyone seen this before? And know of a way or some part to adapt a filter to come straight of the block?

Also looked at this and mentions nothing of it… http://z31.com/repairs/newengine.shtml

[archived image: 2010-02-22161211.jpg]

[archived image: 2010-02-22161154.jpg]

[archived image: 2010-02-22161223.jpg]

Thanks

sprtcrazy17: (2010-02-22 23:09:36)

Found a guy with this setup.. [archived image: DSC01064.jpg]

Then found this kit on ebay

http://cgi.ebay.com/ebaymotors/ws/eBayI … 0459307314

I don't need to go with a remount kit but I hope this isn't the only option

junior85z: (2010-02-22 23:30:15)

cant u transfer the threaded fitting to screw on the filter, from ur AE to the max? I believe you need a 22mm socket for the AE fitting and a standard screw driver and hammer for the max fitting

Matt89: (2010-02-22 23:43:26)

Exactly, just swap in your threaded one.

Retrieved from "https://dev.z31library.com/index.php?title=Forums/Z31P/z31-basics_basic-modifications-basic-questions-aka-the-newbie-forum/Maxima_Oil_Filter_Location&oldid=4240"