Forums/Z31P/z31-basics basic-modifications-basic-questions-aka-the-newbie-forum/Transmission Bell Housing Thread Pitch and Diameter
Imported from Z31Performance.com Forums{{#if:1SIKZ31| — original post by 1SIKZ31}}{{#if:2009-05-06 13:55:15|, posted 2009-05-06 13:55:15}}{{#if:6| · 6 post{{#ifeq:6|1||s}}}}{{#if:/Z31performance_archive/forum/z31-basics/basic-modifications-basic-questions-aka-the-newbie-forum/7383-transmission-bell-housing-thread-pitch-and-diameter.html|
Local archive: view archived thread on dev.z31library.com}}
1SIKZ31: (2009-05-06 13:55:15)
Googled it.
Searched it.
Can't seem to find that page that shows all the threadpitch and diameters of the bolts on the Z31.
Need to know what the thread pitch and diameter to the bellhousing is guys, to bolt my engine up to the engine stand.
Is it:
M10x1.25
or
M10x1.50
or
???
Someone help me please, thanks!
P.S. Don't fucking tell me to remove my bellhousing bolt and just take it to home-depot or something, as the car is NO where near me and I don't want to make the drive, to remove a bolt.
Thanks!
vagabond: (2009-05-06 14:12:36)
I'm a douche. I got bolts from NAPA about a week ago for my stand and forgot to write the pitch down, for this very reason. This is the second time too.
- twisted: Just take the bolt with you. They will match it up at the parts store, or they usually have that display thing with the different threaded holes. :twisted:
If you can wait I can tell you this evening. I'm heading to the store again.
88sinZ: (2009-05-06 15:09:43)
12mmx1.5mm
naw sho meh yer titz
vagabond: (2009-05-06 18:13:34)
Ah good deal. Thank you sir!
aceman: (2009-05-06 21:38:13)
old head bolts>buying new bolts.
1SIKZ31: (2009-05-07 00:30:20)
HA!!!
Old head bolts!
I'm scrapping the bolts anyway!
Will use these, thanks Ace! :twisted: