Forums/Z31P/z31-performance-upgrade-forums suspension-chassis-and-brakes/wheel fitment with s chassis swap

Imported from Z31Performance.com Forums{{#if:ccm797| — original post by ccm797}}{{#if:2014-05-19 18:32:17|, posted 2014-05-19 18:32:17}}{{#if:1| · 1 post{{#ifeq:1|1||s}}}}{{#if:/Z31performance_archive/forum/z31-performance-upgrade-forums/suspension-chassis-and-brakes/23760-wheel-fitment-with-s-chassis-swap.html|
Local archive: view archived thread on dev.z31library.com}}

ccm797: (2014-05-19 18:32:17)

So i'm finally finishing up the suspension on my car and the last item I have yet to address are the wheels and tires. I've referenced the z enthusiasts wheel show and zbums wheel guide to try to give me a little more insight. It appears that what I'm trying to do "should" work. But then again I've thought that about a number of other things that turned out to be a bigger deal than I had planned. Anyway, I'll break this down nice and simple. Here's what I have

Stance z31 coilovers

Z32 front and rear brakes/rotors

S14 subframe swap with all stance multilink (still waiting on parts to install)

Now, for the rears I'm thinking of doing a 18x9.5 +15 with a 275/35/18

fronts going staggered at 18x8 +40 with a 225/40/18

http://www.tf-works.com/enkei-kojin-…-black-18x9-5/

Judging from what others have done I know the size and width will fit but my only concern is that I'm running with a wider S14 sub in the back. Since I'm still waiting for parts to do the install on the subframe I obviously can't take measurements yet. I'm not opposed to rolling my fenders either or bringing in my rear camber a little to make it fit. This is all a complete shot in the dark since I'm obviously not to that exact point yet so I apologize if this is a dumb question. Any first hand experience with similar sizing/fitment advice would be much appreciated.

Thanks!