Z31/computerpinout: Difference between revisions
Site import |
m XenonzcarImporter moved page Sites/Xenonzcar/z31/computerpinout to Z31/computerpinout without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner |
(No difference)
| |
Revision as of 06:38, 16 May 2026
Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.
{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}
ECCS Location
The ECCS or Computer for the Z31 is located behind the passenger's kick panel. This is the small panel on the outer wall right below the glovebox. You will need to remove 2 screws to get the panel off.
There are three connectors that plug into the ECCM. These connections can sometimes corrode and cause Driveability issues. Cleaning these will resolve some problems but sometimes for Diagnostic procedures you will need to check the pinout on sensors. The diagram below will show you what each pin connects to.
