Z31/Illuminated300zxbar php: Difference between revisions
m XenonzcarImporter moved page Sites/Xenonzcar/z31/Illuminated300zxbar php to Z31/Illuminated300zxbar php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner |
Inline image refs: rewrite to local archive; clean empty image artifacts |
||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 1984-1986 Tail Lamp Bar Illumination Modification|url= | {{ImportedFrom|site=Xenonzcar|title=Z31 1984-1986 Tail Lamp Bar Illumination Modification|url=https://dev.z31library.com/xenonzcar_archive/z31/Illuminated300zxbar.php.html|archive=https://dev.z31library.com/xenonzcar_archive/z31/Illuminated300zxbar.php.html|fetched=2026-05-15}} | ||
== Z31 1984-1986 Tail Lamp Bar Illumination Modification == | == Z31 1984-1986 Tail Lamp Bar Illumination Modification == | ||
| Line 5: | Line 5: | ||
Illuminating your 300ZX panel is a simple and inexpensive modification you can do the make your Z stand out. The following is a write up that was done some time ago. | Illuminating your 300ZX panel is a simple and inexpensive modification you can do the make your Z stand out. The following is a write up that was done some time ago. | ||
https://dev.z31library.com/xenonzcar_archive/z31/images/ilumated%20300zx%20bar/1.jpg | |||
==== Items needed ==== | ==== Items needed ==== | ||
| Line 35: | Line 35: | ||
* Reinstall the rear panel and replace the interior trim. Confirm everything is secure and test the new lighting. | * Reinstall the rear panel and replace the interior trim. Confirm everything is secure and test the new lighting. | ||
https://dev.z31library.com/xenonzcar_archive/z31/images/ilumated%20300zx%20bar/Rearlicense300ZX1.jpg | |||
https://dev.z31library.com/xenonzcar_archive/z31/images/ilumated%20300zx%20bar/Rearlicense300ZX2.jpg | |||
https://dev.z31library.com/xenonzcar_archive/z31/images/ilumated%20300zx%20bar/Rearlicense300ZX3.jpg | |||
https://dev.z31library.com/xenonzcar_archive/z31/images/ilumated%20300zx%20bar/Rearlicense300ZX5.jpg | |||
=== Sources Used === | === Sources Used === | ||
[ | [https://dev.z31library.com/xenonzcar_archive/z31/z31fsm.php 1984-1988 Nissan 300ZX Factory Service Manual]- Writen by: Darren Kemp | ||
[[Category:Imported from Xenonzcar]] | [[Category:Imported from Xenonzcar]] | ||
Revision as of 18:01, 16 May 2026
Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.
{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}
Z31 1984-1986 Tail Lamp Bar Illumination Modification
Illuminating your 300ZX panel is a simple and inexpensive modification you can do the make your Z stand out. The following is a write up that was done some time ago.
Items needed
- Tools to remove the rear panel (screwdrivers, trim tools, etc.)
- 300mm LED strip light kit (white, waterproof, 12V, with wiring harness)
- Thin sheet aluminum or steel for mounting
- Glue and/or small screws
- Can of Night Shades or similar spray-on tinting
- Plastic light diffuser or LED-compatible cover
- Wire connectors and heat shrink tubing (for safe LED wiring)
Process
- Remove the rear trim and undo the 4 screws holding the rear panel on.
- Unplug the number plate lights and remove the panel.
- Carefully pry apart the backing from the red plastic section (use trim tools or a flat screwdriver—be gentle to avoid breaking tabs).
- Trim or cut away some of the backing so you can see the "300ZX" writing; it's normal to remove the two inner screw bosses here.
- Test-fit your LED strip—trim the backing as needed so the LED strip will fit evenly behind the lettering.
- Sand the back of the "300ZX" lettering to allow more light to pass through.
- Tint the back of the lettering (using Night Shades or similar) so the letters still look black during the day.
- Reassemble the two panel pieces.
- Cut a plastic light diffuser or LED-compatible cover to size and fit it between the panel and the LED strip to create even light distribution.
- Secure the LED strip to the panel backing using glue or screws and an aluminum mounting plate for stability. Make sure the strip is straight and centered for best results.
- If the LED strip is fragile, handle it with care; replace if necessary.
- Make a thin aluminum reflector panel to improve light output and create a cleaner appearance.
- Glue or screw the aluminum reflector in place.
- Wire the LED strip into the existing number plate light wiring. For easy removal, add a waterproof plug connector.
- Reinstall the rear panel and replace the interior trim. Confirm everything is secure and test the new lighting.
Sources Used
1984-1988 Nissan 300ZX Factory Service Manual- Writen by: Darren Kemp