Z31/SENSORS/caswires/2: Difference between revisions
m XenonzcarImporter moved page Sites/Xenonzcar/z31/SENSORS/caswires/2 to Z31/SENSORS/caswires/2 without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner |
Inline image refs: rewrite to local archive; clean empty image artifacts |
||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 2|url= | {{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 2|url=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/caswires/2.html|archive=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/caswires/2.html|fetched=2026-05-15}} | ||
Pin 2 (G/B)Green with Black trace. This is one half of the sensor trigger. It connects to Pin 17 of the ECCS unit. | Pin 2 (G/B)Green with Black trace. This is one half of the sensor trigger. It connects to Pin 17 of the ECCS unit. | ||
Latest revision as of 18:01, 16 May 2026
Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.
{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}
Pin 2 (G/B)Green with Black trace. This is one half of the sensor trigger. It connects to Pin 17 of the ECCS unit.
When Troubleshooting you should read Infinate resistance when Measuring pins 8 and 17 at the ECCS and will read 0 with Pins 2 and 3 at this plug connected by a jumper