Z31/SENSORS/caswires/3: Difference between revisions
Site import |
Inline image refs: rewrite to local archive; clean empty image artifacts |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 3|url= | {{ImportedFrom|site=Xenonzcar|title=Z31 Crank Angle Sensor Pin 3|url=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/caswires/3.html|archive=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/caswires/3.html|fetched=2026-05-15}} | ||
Pin 3 (G/Y)Green with Yellow trace. This is one half of the sensor trigger. It connects to Pin 8 of the ECCS unit. | Pin 3 (G/Y)Green with Yellow trace. This is one half of the sensor trigger. It connects to Pin 8 of the ECCS unit. | ||
Latest revision as of 18:01, 16 May 2026
Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.
{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}
Pin 3 (G/Y)Green with Yellow trace. This is one half of the sensor trigger. It connects to Pin 8 of the ECCS unit.
When Troubleshooting you should read Infinate resistance when Measuring pins 8 and 17 at the ECCS and will read 0 with Pins 2 and 3 at this plug connected by a jumper