Z31/SENSORS/coil php: Difference between revisions
m XenonzcarImporter moved page Sites/Xenonzcar/z31/SENSORS/coil php to Z31/SENSORS/coil php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner |
Inline image refs: rewrite to local archive; clean empty image artifacts |
||
| Line 1: | Line 1: | ||
{{ImportedFrom|site=Xenonzcar|title=XenonZcar|url= | {{ImportedFrom|site=Xenonzcar|title=XenonZcar|url=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/coil.php.html|archive=https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/coil.php.html|fetched=2026-05-15}} | ||
== Z31 Ignition Coil == | == Z31 Ignition Coil == | ||
| Line 11: | Line 11: | ||
You can test your ignition coil by checking the resistance between the primary and secondary windings. Use a multimeter to measure the resistance across the terminals as shown below. | You can test your ignition coil by checking the resistance between the primary and secondary windings. Use a multimeter to measure the resistance across the terminals as shown below. | ||
https://dev.z31library.com/xenonzcar_archive/z31/SENSORS/coilterminals.jpg | |||
| Terminals | Expected Resistance | | | Terminals | Expected Resistance | | ||
Latest revision as of 18:01, 16 May 2026
Auto-imported article. This page was generated by the Z31 Library import pipeline from forum sources{{#if: | in category {{{category}}} | }}. The text was synthesized by an LLM and has not been hand-verified. Please correct errors and remove this banner once reviewed.
{{#if: | [[Category:Auto-imported — {{{category}}}]] | }}
Z31 Ignition Coil[edit]
The Z31 Ignition Coil is a high output ignition coil comparable to many performance coils. Replacing your Coil with an aftermarket coil will not increase any performance in your Z.
WARNING - Do this modification at your own risk. We Are not responsable for any issues of your own doing.
Testing the Ignition Coil[edit]
You can test your ignition coil by checking the resistance between the primary and secondary windings. Use a multimeter to measure the resistance across the terminals as shown below.
| Terminals | Expected Resistance | |---|---| | 1 – 2 | 1 Ω | | 1 – 3 | 10k Ω |
Note: If your coil readings are outside these ranges, the coil is internally bad and should be replaced.
Wiring the Ignition Coil[edit]
Please Refer to the chart below on how the ignition coil is wired
| Terminal | Function | |---|---| | Terminal 1 | Coil Ground | | Terminal 2 | Coil 12V+ | | Terminal 3 | Coil Output to Distributor |