S30/FuseBlockproblems php - Revision history

XenonzcarImporter: Fix: convert markdown link syntax to wiki syntax; remove broken self-anchor links

2026-05-16T23:33:19Z

Fix: convert markdown link syntax to wiki syntax; remove broken self-anchor links

← Older revision		Revision as of 23:33, 16 May 2026
Line 3:		Line 3:
	== S30 Early Z Car Fuse Block Melt Down Problem ==		== S30 Early Z Car Fuse Block Melt Down Problem ==

	![~~Melted Datsun Z Fuse Box](~~https://dev.z31library.com/xenonzcar_archive/s30/images/Fuse ~~Box~~/meltedfusebox.jpg)		![https://dev.z31library.com/xenonzcar_archive/s30/images/Fuse%20Box/meltedfusebox.jpg Melted Datsun Z Fuse Box]

	The early Z cars have a common problem where the fuse block plastic melts due to corrosion build-up on the back side of the fuse block connectors where the main lead from the battery connects. When the electrical resistance caused by the corrosion reaches a certain point, the metal connectors and their supporting base heat up so much that the fuse block plastic base melts. This can cause the fuse end connector to come loose or a fusible link in the wiring harness to fail.		The early Z cars have a common problem where the fuse block plastic melts due to corrosion build-up on the back side of the fuse block connectors where the main lead from the battery connects. When the electrical resistance caused by the corrosion reaches a certain point, the metal connectors and their supporting base heat up so much that the fuse block plastic base melts. This can cause the fuse end connector to come loose or a fusible link in the wiring harness to fail.
Line 13:		Line 13:
	=== Typical damage on corroded 240Z fuse block ===		=== Typical damage on corroded 240Z fuse block ===

	![~~Typical damage on corroded 240Z fuse block](~~https://dev.z31library.com/xenonzcar_archive/s30/images/Fuse ~~Box~~/my-melted-fuse-box-2.jpg)		![https://dev.z31library.com/xenonzcar_archive/s30/images/Fuse%20Box/my-melted-fuse-box-2.jpg Typical damage on corroded 240Z fuse block]

	The corrosion starts here because the fuse clips are made of brass, and the terminal rivets appear to be steel. They are not soldered together, but depend upon metal-to-metal contact. These are dissimilar metals, and corrosion starts working between the rivet head and the fuse clip. Corrosion = resistance = heat, hence melting plastic and melting at the ends of the fuse internally.		The corrosion starts here because the fuse clips are made of brass, and the terminal rivets appear to be steel. They are not soldered together, but depend upon metal-to-metal contact. These are dissimilar metals, and corrosion starts working between the rivet head and the fuse clip. Corrosion = resistance = heat, hence melting plastic and melting at the ends of the fuse internally.

XenonzcarImporter: Reformat: split adjacent link runs into bulleted lists

2026-05-16T21:29:47Z

Reformat: split adjacent link runs into bulleted lists

← Older revision		Revision as of 21:29, 16 May 2026
Line 30:		Line 30:

	* images From: V8-240Z of		* images From: V8-240Z of
	[http://www.classiczcars.com/ classiczcars.com] - Repair By: Greg McCann		[http://www.classiczcars.com/ classiczcars.com]
			* Repair By: Greg McCann

	[[Category:Imported from Xenonzcar]]		[[Category:Imported from Xenonzcar]]

XenonzcarImporter: Inline image refs: rewrite to local archive; clean empty image artifacts

2026-05-16T18:01:22Z

Inline image refs: rewrite to local archive; clean empty image artifacts

← Older revision		Revision as of 18:01, 16 May 2026
Line 1:		Line 1:
	{{ImportedFrom\|site=Xenonzcar\|title=S30 Early Z Car Fuse Block Melt Down Problem\|url=~~http~~://~~www~~.~~xenonzcar~~.com/s30/FuseBlockproblems.php.html\|archive=https://dev.z31library.com/xenonzcar_archive/s30/FuseBlockproblems.php.html\|fetched=2026-05-15}}		{{ImportedFrom\|site=Xenonzcar\|title=S30 Early Z Car Fuse Block Melt Down Problem\|url=https://dev.z31library.com/xenonzcar_archive/s30/FuseBlockproblems.php.html\|archive=https://dev.z31library.com/xenonzcar_archive/s30/FuseBlockproblems.php.html\|fetched=2026-05-15}}

	== S30 Early Z Car Fuse Block Melt Down Problem ==		== S30 Early Z Car Fuse Block Melt Down Problem ==

	![Melted Datsun Z Fuse Box](~~http~~://~~xenonzcar~~.com/s30/images/Fuse Box/meltedfusebox.jpg)		![Melted Datsun Z Fuse Box](https://dev.z31library.com/xenonzcar_archive/s30/images/Fuse Box/meltedfusebox.jpg)

	The early Z cars have a common problem where the fuse block plastic melts due to corrosion build-up on the back side of the fuse block connectors where the main lead from the battery connects. When the electrical resistance caused by the corrosion reaches a certain point, the metal connectors and their supporting base heat up so much that the fuse block plastic base melts. This can cause the fuse end connector to come loose or a fusible link in the wiring harness to fail.		The early Z cars have a common problem where the fuse block plastic melts due to corrosion build-up on the back side of the fuse block connectors where the main lead from the battery connects. When the electrical resistance caused by the corrosion reaches a certain point, the metal connectors and their supporting base heat up so much that the fuse block plastic base melts. This can cause the fuse end connector to come loose or a fusible link in the wiring harness to fail.
Line 13:		Line 13:
	=== Typical damage on corroded 240Z fuse block ===		=== Typical damage on corroded 240Z fuse block ===

	![Typical damage on corroded 240Z fuse block](~~http~~://~~xenonzcar~~.com/s30/images/Fuse Box/my-melted-fuse-box-2.jpg)		![Typical damage on corroded 240Z fuse block](https://dev.z31library.com/xenonzcar_archive/s30/images/Fuse Box/my-melted-fuse-box-2.jpg)

	The corrosion starts here because the fuse clips are made of brass, and the terminal rivets appear to be steel. They are not soldered together, but depend upon metal-to-metal contact. These are dissimilar metals, and corrosion starts working between the rivet head and the fuse clip. Corrosion = resistance = heat, hence melting plastic and melting at the ends of the fuse internally.		The corrosion starts here because the fuse clips are made of brass, and the terminal rivets appear to be steel. They are not soldered together, but depend upon metal-to-metal contact. These are dissimilar metals, and corrosion starts working between the rivet head and the fuse clip. Corrosion = resistance = heat, hence melting plastic and melting at the ends of the fuse internally.

XenonzcarImporter: XenonzcarImporter moved page Sites/Xenonzcar/s30/FuseBlockproblems php to S30/FuseBlockproblems php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner

2026-05-16T06:38:34Z

XenonzcarImporter moved page Sites/Xenonzcar/s30/FuseBlockproblems php to S30/FuseBlockproblems php without leaving a redirect: Flatten Sites/ namespace; provenance preserved via ImportedFrom banner

← Older revision	Revision as of 06:38, 16 May 2026
(No difference)

XenonzcarImporter: Site import

2026-05-16T06:26:18Z

Site import

New page

{{ImportedFrom|site=Xenonzcar|title=S30 Early Z Car Fuse Block Melt Down Problem|url=http://www.xenonzcar.com/s30/FuseBlockproblems.php.html|archive=https://dev.z31library.com/xenonzcar_archive/s30/FuseBlockproblems.php.html|fetched=2026-05-15}}

== S30 Early Z Car Fuse Block Melt Down Problem ==

![Melted Datsun Z Fuse Box](http://xenonzcar.com/s30/images/Fuse Box/meltedfusebox.jpg)

The early Z cars have a common problem where the fuse block plastic melts due to corrosion build-up on the back side of the fuse block connectors where the main lead from the battery connects. When the electrical resistance caused by the corrosion reaches a certain point, the metal connectors and their supporting base heat up so much that the fuse block plastic base melts. This can cause the fuse end connector to come loose or a fusible link in the wiring harness to fail.

If the main fusible link between the fuse block and the battery malfunctions—or a previous owner has replaced the fusible link with a non-fusible wire—a costly wiring harness meltdown can occur under the dash or in the engine compartment.

New owners need to be alert for this potentially serious problem hidden out of view. Visually check the fuse block before buying a used 240Z. Fuse blocks with modest damage can often be repaired if detected in time.

=== Typical damage on corroded 240Z fuse block ===

![Typical damage on corroded 240Z fuse block](http://xenonzcar.com/s30/images/Fuse Box/my-melted-fuse-box-2.jpg)

The corrosion starts here because the fuse clips are made of brass, and the terminal rivets appear to be steel. They are not soldered together, but depend upon metal-to-metal contact. These are dissimilar metals, and corrosion starts working between the rivet head and the fuse clip. Corrosion = resistance = heat, hence melting plastic and melting at the ends of the fuse internally.

=== >Repair ===

The fuse box can be replaced, but it makes sense to try to repair them because the cost of a new one is anywhere from $80–$100.

If the plastic is still in fair shape in the fuse box, you can fix the problem by removing the fuse clip contacts. Use a small screwdriver to depress the little barbs on the sides of the clips and then push them out the back of the fuse box. This allows you to clean and solder the clips to the rivets without melting the plastic.

Repairs to the plastic base can be made at this time using JB Weld epoxy. JB Weld has a high melting temperature, much higher than the original plastic. The tension that the fuse clips have is also important, so carefully reform the clips so that they firmly hold the fuse.

If the plastic base is in bad shape, you can "bypass" the fuse box by using a 20-amp rated external fuse holder spliced into the particular circuit. The external fuse holder can then be hidden nicely behind the fuse box.

=== Sources Used ===

* images From: V8-240Z of
[http://www.classiczcars.com/ classiczcars.com] - Repair By: Greg McCann

[[Category:Imported from Xenonzcar]]