z31p_TorontoZ: Forum archive import (z31performance)

2026-05-15T05:16:15Z

Forum archive import (z31performance)

New page

{{ForumImport
|op_user=TorontoZ
|op_date=2019-02-25 04:45:34
|post_count=2
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/electronics/542526-5-pin-din-amp-wiring.html
}}

'''TorontoZ:''' <small>(2019-02-25 04:45:34)</small>

Does anyone have the pinout of the 5 pin din or a radio manual that includes the 5 pin din connector that comes out of the radios to go to the amp for the rear speakers? Would be appreciated thanks

----
'''Z_Karma:''' <small>(2019-02-25 18:50:45)</small>

As requested: previous post.

https://z31performance.com/forum/z31…am-help-needed

{{Quote|user=Z_Karma|The only thing i have is the 5pin DIN pinout for the Hitachi CSK-7101ZG (no equalizer)

CSK-7101ZK 5pin DIN pinout.jpg

This is from the stereo side. The earlier Z31 amp/stereo combo used chassis ground for the negative.

If you compare that to this aux amp image for a 2002 Altima [http://www.nissanclub.com/forums/2002-2006-nissan-altima-discussion-2-5-3-5/314773-free-almost-diy-aux-02-altima.html (that i found online)]

Aux_input_diagram.jpg

It might be possible that your audio signals are on the same as the altima (atleast the positive outputs match)

You should be able to test this by connecting a scrap headphone speaker to those pins (4&6 or 5&7) and listen

for sound from the headunit.

A loud pop followed by smoke means that's not it and you shorted 12V across the voice coil, which is why you use a scrap speaker.}}

Forums/Z31P/z31-repairs-forums electronics/5 pin din amp wiring - Revision history

z31p_TorontoZ: Forum archive import (z31performance)