Editing Forums/Z31P/z31-repairs-forums suspension-chassis-and-brakes-aa/Front Spring ID

{{ForumImport
|op_user=G-E
|op_date=2015-11-25 11:56:33
|post_count=3
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/suspension-chassis-and-brakes-aa/25466-front-spring-id.html
}}

'''G-E:''' <small>(2015-11-25 11:56:33)</small>

Could be, I'm not familiar with the colour spots for a shiro… but the strut tubes look correct, since the shiro didn't have the turbo sized tubes, because the shiro didn't have the electrically adjustable strut inserts

So what you have is visually consistent with shiro parts

----
'''88sinZ:''' <small>(2015-11-25 13:41:19)</small>

tube is roughly ~52mm with Tokico markings. Not sure if that will help

IMAG0445.jpg

IMAG0446.jpg

IMAG0447.jpg

----
'''88sinZ:''' <small>(2015-11-26 04:50:50)</small>

Would spring height be worth measuring?

Seller says he's 99% sure they came from the Shiro because it was the only late model he parted out. PN matches late turbo non-adjustable.

I really only picked these up for the hubs, and will hold onto the tubes for something in the future.. (eh hm FortuneAuto)

So if i can sell the springs to make a cut it'd be nice