Editing Forums/Z31P/z31-repairs-forums engine-mechanical/Reringing a vg30

{{ForumImport
|op_user=jjewell
|op_date=2015-07-25 11:51:16
|post_count=3
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/engine-mechanical/25215-reringing-a-vg30.html
}}

'''jjewell:''' <small>(2015-07-25 11:51:16)</small>

I'm about to rering and bearing one of my spare motors, my question is about the different ring sets that are available. I'm using a non turbo block and pistons like my last setup that runs 23psi form a turbonetics t3/t4. There are a few different rings sets, cast-iron and chrome. What would be the better choice? I'm only rehoning the cylinder walls by hand so what is my best option for rings?

----
'''Augustus Maximus:''' <small>(2015-07-29 15:32:23)</small>

[http://www.enginebuildermag.com/2012/10/performance-piston-rings/ http://www.enginebuildermag.com/2012…-piston-rings/]

Read.

----
'''irace911:''' <small>(2015-11-06 05:12:14)</small>

Thinking metal, maybe rings that don't interfere with jroperties of the block. I'm sure the engineers took care of this, but you don't want sand paper rings.ha