Editing Forums/Z31P/z31-repairs-forums electronics/Sensor attached to original radiator

{{ForumImport
|op_user=captainkim
|op_date=2018-07-19 12:50:09
|post_count=3
|archive_url=/Z31performance_archive/forum/z31-repairs-forums/electronics/540275-sensor-attached-to-original-radiator.html
}}

'''captainkim:''' <small>(2018-07-19 12:50:09)</small>

I changed radiators from the OEM and there was a slot for some sensor that went directly into the radiator. The new one doesnt have a slot ofr it and its now just hanging loose. Does anyone know what that is and if its needed? Do i need to tap the new rad to install the sensor or can I just leave it hanging?

----
'''dbruce:''' <small>(2018-07-19 17:56:34)</small>

The turbo radiator had the sensor to start the electric turbo radiator fan (at 212 degrees?) . If the OEM fan has been deleted or you have your own fans and fan control you don't need it.

fyi - if you deleted the mechanical fan, you need fans to run if the AC is on …

----
'''captainkim:''' <small>(2018-07-19 19:43:16)</small>

Thanks so much. I left the one fans on so hopefully it will suffice. Thanks again