Editing Forums/Z31P/z31-performance-upgrade-forums engine-mechanical-aa/Plenum Porting

{{ForumImport
|op_user=300zxturboftw
|op_date=2014-07-02 16:57:42
|post_count=7
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-mechanical-aa/23985-plenum-porting.html
}}

'''300zxturboftw:''' <small>(2014-07-02 16:57:42)</small>

Anyone on the board still porting plenum's? Need mine done quickly for tune....

----
'''newsieone:''' <small>(2014-07-03 16:33:02)</small>

You might check with Michaelp.

86NA

88T

----
'''frostvectron:''' <small>(2014-07-03 18:29:34)</small>

Is it awful to gut one with an angle grinder or something? I was thinking about being a cheapskate and doing it myself…

----
'''les_joey_paul:''' <small>(2014-07-03 18:50:15)</small>

That's what they use to do it lol.

You could get one though ASCO , last I checked he still did them, gutted, port matched, etc

----
'''michaelp:''' <small>(2014-07-04 03:41:58)</small>

{{Quote|user=les_joey_paul|That's what they use to do it lol.

You could get one though ASCO , last I checked he still did them, gutted, port matched, etc}}

They discontinued them.

----
'''G-E:''' <small>(2014-07-04 04:41:49)</small>

Just make sure if you replace any metal, it's at least 1/4" thick to prevent flex

----
'''frostvectron:''' <small>(2014-07-08 03:45:04)</small>

Thanks! Will keep it in mind. [archived image: smile.png]