Editing Forums/Z31P/z31-performance-upgrade-forums engine-mechanical-aa/Custom Fan Shroud

{{ForumImport
|op_user=wv300zx
|op_date=2017-04-19 21:59:33
|post_count=5
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-mechanical-aa/535290-custom-fan-shroud.html
}}

'''wv300zx:''' <small>(2017-04-19 21:59:33)</small>

Anyone out there in Z land have a great fan shroud that they want to share the Plans/Schematics/Dimensions for??

I have a 1987 300zx turbo that I put a Small Block Chevy engine in and I can not keep the beast cool.

any advice would be great thanks

wv300zx

freed7907@yahoo.com

----
'''Z_Karma:''' <small>(2017-04-19 22:24:26)</small>

If you are using a stock radiator, use an electric fan from a mercury cougar.

https://z31performance.com/forum/z31…ric-fans/page2

----
'''nismo kid:''' <small>(2017-04-21 04:48:16)</small>

^+1 I have a dual speed Taurus electric fan on my car.

[archived image: 20170206_222448.jpg]

----
'''NissanEgg:''' <small>(2017-04-22 02:12:48)</small>

89-94 Maxima fans fit perfect on the stock radiator after you trim about 2" off the left end of shroud.

----
'''nismo kid:''' <small>(2017-04-22 03:21:34)</small>

^That works too. I couldn't use it with my setup but we did it on my buddy Andrew84zx' car. Heres an old pic of his car. It take alot of trimming when the Champion 3 row radiator is used. But it works. It's just a really tight fit.

[archived image: 20160318_221624.jpg]