Editing Forums/Z31P/z31-performance-upgrade-forums engine-management/aem uego gage troubles

{{ForumImport
|op_user=300zxturboftw
|op_date=2014-04-12 22:21:47
|post_count=5
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/23618-aem-uego-gage-troubles.html
}}

'''300zxturboftw:''' <small>(2014-04-12 22:21:47)</small>

Gage starts at 14.8 and counts back to 10afr and stays at 10. I tried a new sensor in atmosphere and it does the same thing. Anyone have this issue before. Was working fine before I pulled trans

----
'''SATAN:''' <small>(2014-04-13 01:31:49)</small>

[http://forums.probetalk.com/showthread.php?t=1701215473 http://forums.probetalk.com/showthread.php?t=1701215473]

----
'''300zxturboftw:''' <small>(2014-04-13 01:54:01)</small>

Was looking for a confirmation thread…thought it was my wiring too which I looked at this afternoon. Didn't see anything but I'll take another look. The harnesses are only $15 anyhow. Thanks Jon.

----
'''jaqattack02:''' <small>(2014-04-13 05:26:12)</small>

You sure something doesn't need to be calibrated? I'm not sure on the AEM, but I know some brands have to be calibrated from time to time.

----
'''300zxturboftw:''' <small>(2014-04-13 05:34:48)</small>

{{Quote|user=jaqattack02|You sure something doesn't need to be calibrated? I'm not sure on the AEM, but I know some brands have to be calibrated from time to time.}}

Nope. Aem auto calibrates…has 4 settings though p00 through p04…for gas and lamba and such