Editing Forums/Z31P/z31-performance-upgrade-forums engine-management/ECU swap

{{ForumImport
|op_user=Eric87zx
|op_date=2015-12-26 08:11:13
|post_count=4
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/25508-ecu-swap.html
}}

'''Eric87zx:''' <small>(2015-12-26 08:11:13)</small>

I have a 1987 300zx turbo with low impedance injectors. I recently got a 1988 turbo ecu with high impedance injector reading. I know you're suppose to wire in some resistors to fix the high and low problem. Other then that will I need to do any other wiring to make this ecu work?

----
'''bonfire79:''' <small>(2015-12-26 08:52:38)</small>

''might be easier to just swap out your low I injectors for some high I injectors from an 88 turbo car

Bon''

----
'''Eric87zx:''' <small>(2015-12-26 09:04:55)</small>

I plan on going with a Jim wolf ecu and their injectors they recommend to use with the tune which I think are high.

----
'''amreboot:''' <small>(2015-12-26 16:43:32)</small>

[http://redz31.net/pages/fuel.html http://redz31.net/pages/fuel.html]