Editing Forums/Z31P/z31-performance-upgrade-forums engine-management/Base ignition map (rpm/Map)

{{ForumImport
|op_user=RoyH
|op_date=2019-03-05 12:26:50
|post_count=3
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/542642-base-ignition-map-rpm-map.html
}}

'''RoyH:''' <small>(2019-03-05 12:26:50)</small>

Hi,

Back from being away for some years. Last year i dug out my 88 z31 turbo and (86 engine) and modded it a bit. The build topic will follow later [archived image: smile.png]

In short i'm looking for an ignition base map based on rpm vs MAP instead of rpm vs MAF (Original nissan / nistune). I changed the engine management to Autronic so its using MAP instead of MAF.

An excel or Just a picture would be fine.. I Just need the numbers.

Engine is stock except for the following

- autronic ecu

- MAP sensor instead of MAF

- holset hx35 turbo

- rx7 550cc injectors

- vw vr6 dis ignition system.

Thanks



----
'''Rick88ss:''' <small>(2019-04-04 21:31:49)</small>

no response? Did you get it figured out? maybe some people that are running mega or microsquirt can share their timing map

----
'''RoyH:''' <small>(2019-06-04 22:24:16)</small>

Nope, I wrote something myself and it runs nice and smooth. Well at least at idle and low revs. Still need to finish allot on the car before I can drive and tune it a bit more