Editing Forums/Z31P/z31-performance-upgrade-forums engine-management/Air Reg and IACV hoses

{{ForumImport
|op_user=Careless
|op_date=2011-11-13 04:12:12
|post_count=4
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/engine-management/16094-air-reg-and-iacv-hoses.html
}}

'''Careless:''' <small>(2011-11-13 04:12:12)</small>

So i'm having two bungs welded to my intake hard pipe this week to finish this shit up…

one for the IACV/FICD on the driver side of the intake manifold.

one for the Air Regulator on the passenger side of the intake manifold.

I find my car likes these in our changing climates, so I choose to keep them.

My question is… If i just weld one bung, and then just split it to the other, wouldn't that have the same effect- or do they need all the air they can get from these 5/8th's hoses they use? Would having one go to the AIR reg, and then Teeing off with a fitting into the FICD be such an issue?

I don't see why not, but I figured I'd ask if anyone had issues with them.

(yes, I'm keeping them. no, I don't care if you "don't need them").

----
'''gardner86zx:''' <small>(2011-11-13 19:55:33)</small>

one will be fine. That is all i have had on mine.

----
'''Careless:''' <small>(2011-11-13 19:58:00)</small>

thnx. should make this a lot cleaner/easier/less costly as well.

----
'''Kutakino:''' <small>(2011-11-17 05:35:34)</small>

I've got the idle controls and air regulator tee'd off from one source as well, works just like it used to with the stock charge pipe.