Editing Forums/Z31P/z31-performance-upgrade-forums driveline-aa/Transmission mount not lining up

{{ForumImport
|op_user=TearingRaven
|op_date=2013-04-07 02:24:07
|post_count=4
|archive_url=/Z31performance_archive/forum/z31-performance-upgrade-forums/driveline-aa/21190-transmission-mount-not-lining-up.html
}}

'''TearingRaven:''' <small>(2013-04-07 02:24:07)</small>

Ok guys so good news, the motor is in!!! Only trouble is that the transmission mount is not lining up the car..... never had this issue before. The car is a 86na and the trans is the 30A. So whats the deal?

[archived image: D1E841AC-9D87-48E8-9CE2-67C611D4528F-25719-0000132B71CC3749_zps46f1bc34.jpg]

[archived image: 41444CCE-D446-4A01-95B4-81FE4C61128A-25719-0000132B66DE3D5B_zps4da384bb.jpg]

----
'''gardner86zx:''' <small>(2013-04-07 02:40:54)</small>

What trans mount are you using?

----
'''TearingRaven:''' <small>(2013-04-07 03:01:59)</small>

I'm thinking its the one from the 86, but I can't be sure. I had two and tossed one, thinking they were all the same. Doh!

----
'''TearingRaven:''' <small>(2013-04-07 04:22:06)</small>

Ok well looks like the brackets are different on the 84-86 and 87-89 brackets. So that must be the deal. Too bad I already customized the other mount haha

Oh well..... will update after junkyard tomorrow!